- Thomson multimedia VCR User Manual

Use

To view a tape and explore the recordings, to view a still

image and retrieve particular scenes in the accelerated

play mode, to rewind to the beginning or wind fast

forward to the end of the tape.

Viewing a tape

To view a channel via the video

recorder

1 Switch the television set and the video recorder on.

2 Set the vcr/dvd/tv button to tv, then press the key AV (22). The channel picture which

has been selected on the video recorder is displayed on the television screen.

3 Use keys 0 to 9 to change channel or the key pr+/pr- (19).

Viewing a tape

Play

1 Load a tape

2 Press key PLAY (24).

When the picture is poor, adjust the phase (page 20). If the colour is not reproduced

properly, try another standard (PAL, SECAM or MESECAM) selectable in the PICTURE

menu (page 21).

Accelerated play

In play mode, press key REW. (23) or F.FWD. (25) repeatedly to change the speed

and direction of accelerated play.

You may also use the SHUTTLE (outer ring) which is situated on the front side of the video

recorder to manipulate accelerated play.

Still image - Pause

In play mode, press key PAUSE (28) to pause a picture, and press repeatedly to wind

forward image by image.

Variable slow motion

1 Press the PAUSE (28).

2 Press key REW. (23) or F.FWD. (25) to change the speed and direction of slow

motion.

The inner knob JOG fitted to the front of the video recorder may also be used to explore an

image by image sequence in both forward or backward play.

Stop

Press key STOP (27) to stop play.

Rewind or Fast Forward

1 Press the key STOP (27).

2 Press the keys REW. (24) or F.FWD. (26).

Ejection of the tape

1 Switch the video recorder to STOP.

2 Press the key EJECT on the front of the video recorder.

J Jog & Shuttle (outer ring)

(on the front side of the video recorder)

r9-GB3-DAE 12/05/2000 18:39 Page 11