User's Manual

E-DOC-CTC-20061027-0003 v2.0
Eth Commands
318
eth switch shaper config
Configure common ingress shaper parameters.
SYNTAX:
where:
RELATED COMMANDS:
eth switch shaper config shaper = <number{0-1}>
[unicast = <disabled|enabled>]
[multicast = <disabled|enabled>]
[broadcast = <disabled|enabled>]
[control = <disabled|enabled>]
[unknown = <disabled|enabled>]
[discard = <disabled|enabled>]
shaper The shaper instance REQUIRED
unicast Shape unicast traffic. OPTIONAL
multicast Shape multicast traffic. OPTIONAL
broadcast Shape broadcast traffic. OPTIONAL
control Shape MAC control traffic. OPTIONAL
unknown Shape traffic with unknown destination address. OPTIONAL
discard Discard frame at overflow (else attempt for flow control) OPTIONAL
eth switch shaper ifconfig Configure per port shaper parameters.
eth switch shaper iflist Display shaper configuration per port.