- Thomson multimedia Television User Manual

12
Select the Balance line (red key).
Balance the sound between the left and right channels.
Repeat the same procedure to select and successively adjust the
Bass and Treble.
Press briefly
The following menu is displayed :
HEADPHONES is selected.
If this is not the case, select the Contents line with the red
button and HEADPHONES with .
Select the Headphones line (red key).
You can then adjust the volume for the headphone.
This operation also sets the output level of the HIFI
jacks (CINCH).
Note : When the transmission is multilingual (DUAL) or an
AV programme, the following menu appears. It is possible
to select SOUND 1 or SOUND 2 in the headset.
Select the Source line:
then select Sound 1
or Sound 2
The sound output on sockets AV1 and AV2 must be adjusted
according to the type of headset connected.
Press briefly.
The following menu is displayed :
AV is selected.
If this is not the case, select the Contents line with
the red key and AV with .
Select the AV1/AV2 Device line (red key).
Then selected Stereo = stereo VCR
Mono = mono VCR
Press to remove the menu from the screen.
television set
sound adjustments
Sound Auto/Stereo Mono
Effect Normal Wide
Balance

Bass
Treble
LOUDSPEAKERS HEADPHONES AV

Source Sound 1 Sound 2 Sound 3
Headphone
AV1/AV2 Device Stereo Mono
LOUDSPEAKERS HEADPHONES AV
AV1/AV2 Device Stereo Mono
LOUDSPEAKERS HEADPHONES AV
HEADPHONES
AV
Balance
-+
+
-+
-+
-+
TV
-+
-+

Headphone

Headphone
P.12 GB 12/06/96 14:18 Page 12