- Thomson Multimedia Broadcast Solutions Operator's Manual Camcorder LDK 5430
Table Of Contents
- Contents
- About this Manual
- Introduction
- Technology
- Smart Card
- Features
- Important Precautions
- Assembling the Units
- Transport Case
- Lens
- 1.5-inch Viewfinder
- 1.5-inch Viewfinder Accessories
- Other Viewfinders
- Zoom Controls
- Microphone
- Tripod Adapter Plate
- SuperXPander
- Shoulder Pad
- Rain and Off-use Cover
- Script board
- Top Light
- Configurations
- Basic Configurations
- Location of Controls and Functions
- Power Supply
- Security and Access
- Video Functions
- Monitoring Functions
- Viewfinder
- Viewfinder Indicators
- Audio
- Intercom
- Control Functions
- Auxilary Functions
- Shooting
- Using the Camera
- Standard settings
- Colour Bar
- Gain selection
- Optical filter selection
- Colour temperature selection
- Auto-White Balance
- Shooting Screens
- Exposure Time
- Using the Menu System
- Introduction
- Systems Menu
- Appendix
- System Menu Structure
- List of System Menu Functions
- List of Abbreviations
- Introduction
- Assembling the Units
- Configurations
- Location of Controls
- Shooting
- Using the Menu System
- Appendix
Shooting Operator's Manual LDK 200 Triax 5-7
Exposure Time
The exposure time values of 1/200, 1/500 and 1/1000
of a second are used to capture fast moving objects
so that these can be played back sharply in slow
motion. The value selected depends on the speed of
the moving object.
Note: Increasing the exposure speed lowers the
camera sensitivity proportionally.
The exposure selection also includes lighting control
positions which can be used when shooting with
lighting that is operating at a different frequency to the
camera. There are two position 50 Hz and 60 Hz. Each
of these positions can be varied further in a range from
-10 to +10.
To reduce flicker select the frequency closest to the
frequency of the lights and then vary the lighting
control in the system Install menu to obtain the best
result.