- Thomson DVD Player Data Sheet

Speakers

System audio quality

Speaker setting is required only if you use the 6 cinch jacks on the rear of the DVD player. In that

case, the Dolby Digital / MPEG-2 decoder sends a decoded 5.1 signal to the amplifier (for further

information, refer to figures 3 and 5 on pages 14-15). Speaker setting is required only at installation.

Depending on the amplifier and connected speakers, confirm your set-up with the menu below.

Refer to pages from 13 to 15 for connections.

This interactive menu page allows you to,

• Select the speakers you have connected.

• Adjust their audio volume and respective delay.

• Configure all the decoding values for the Dolby Digital and audio multichannel MPEG 2 for your

speakers.

• Display the room with the position and number of speakers (including the subwoofer).

• Choose the size and quality of your speakers by clicking twice on each speaker (function available

for Dolby Digital DVD discs only).

• Adjust the delay between the front and surround speakers, and for the central speaker according to

its position compared to the front speakers.

• Test the setting by running a test sound (“pink noise”).

If you do not have the 5 recommended speakers (+1: the Subwoofer) for multichannel surround

sound,

• Click twice on the icon corresponding to your missing speakers (subwoofer and/or surround

speakers): they disappear from the screen. Multichannel sound will now be distributed across the

remaining speakers. As you purchase more speakers, you can re-activate them one by one.

DTH4500-GB 7/09/00 13:34 Page 37