TV_DVD_LCD_en 27/06/02 14:30 Page 1 Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Remote control:TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TV_DVD_LCD_en 17/06/02 11:45 Page 2 Precautions Precautions concerning the installation and care of your LCD TV/DVD. • Safety Caution: the screen of your LCD TV/DVD may be damaged if is cleaned with strong detergents, alcohol or abrasive products. The TV/DVD’s components are sensitive to heat.The maximum ambient temperature should not exceed 35° Celsius. Do not cover the vents at the back or top of the TV/DVD. Leave sufficient space around it to allow adequate ventilation.
TV_DVD_LCD_en 17/06/02 11:45 Page 3 Switching on Follow the instructions on this page on how to switch on your TV/DVD set and the remote control before going on to the channel set-up procedure described on page 6. 220 - 240 V ~ 50 Hz 1 Install two LR06 or AA batteries in the remote control (see below). 2 Plug the AC adapter jack into the DC IN socket at the back of your Power supply unit 3 LCD TV/DVD. It is used to supply power to your TV/DVD which must only be powered with direct current.
TV_DVD_LCD_en 17/06/02 11:45 Page 4 Remote control : TV Most of your TV/DVD’s functions are available via the menus that appear on the screen.The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings. CONTROL KEYS To switch on and off your TV/DVD. To control your TV/DVD set, switch the selector to the tv+dvd position. To control other equipment, see page 5. To switch from TV to DVD mode or from DVD to TV mode.
TV_DVD_LCD_en 17/06/02 11:45 Page 5 Remote control : other equipment Only makes of apparatus of the THOMSON group benefit from the actions of all the keys. The remote control supplied with your TV/DVD may vary depending on the model you have chosen. Same remote controls can be used for other equipment, such as video recorders, DVD players, satellite receivers or Hi-fi systems. This page provides information concerning the remote control’s use with these other types of equipment.
TV_DVD_LCD_en 17/06/02 11:45 Page 6 Initial set-up The initial set-up consists in carrying out all the necessary settings to search and store all the channels you can receive in your area. Make sure that the TV/DVD is switched on and follow steps 1 to 6 on this page. When you first switch the TV/DVD on, the language selection menu appears. If this does not happen, refer to Manual channel set-up section to find out how to carry out an Autosearch.
TV_DVD_LCD_en 17/06/02 11:45 Page 7 Manual set-up The information provided on this page is useful if you find that some channels have not been stored during the initial set-up or automatic update processes.This can happen if you are setting up cable network channels. Setting up channels manually requires every setting for every channel to be entered, one at a time. Display the OVERVIEW by pressing tv menu button, select Installation line and confirm with ok.The INSTALLATION OVERVIEW is displayed.
TV_DVD_LCD_en 17/06/02 11:45 Page 8 General operation This page describe the basic features of your TV/DVD with LCD screen. Switching the TV/DVD set on and off To switch the TV/DVD set on, press the B button on the keyboard.When the set is on, the indicator on the front is green. Standby mode: press the B button on the keyboard or on the remote control.When the TV/DVD set is in standby mode, the indicator on the front is red. The TV/DVD set remains powered up, but with low energy consumption.
TV_DVD_LCD_en 17/06/02 11:45 Page 9 Setting the time – List of programmes The information on this page explains how to use the Time menu functions (Setting the time, Sleep timer,Wake-up), as well as those for the LIST of programmes menu. Time Display the OVERVIEW menu using the tv menu button and select the Time option. Press ok to confirm.The TIME menu is displayed. Return: returns to the OVERVIEW menu.
TV_DVD_LCD_en 27/06/02 10:58 Page 10 Virtual Dolby Surround Dolby Virtual is a technology certified Dolby Laboratories, that creates a virtualized surround sound experience from two speakers. The Virtual Dolby Surround function in works multi-channel and Dolby Surround encoded audio sources.Virtual Dolby Surround retains all of the original multichannel audio information and provides the listener with the sensation of being surrounded by additional speakers.
TV_DVD_LCD_en 17/06/02 11:45 Page 11 Picture and Preferences The information on this page allows you: - to adjust your TV/DVD’s picture to suit better your preference, the type of programme you are watching and the ambient lighting. - to set preferences for some features of your TV/DVD with LCD screen. Picture Display the OVERVIEW with the tv menu button. Select Picture line and press ok to display PICTURE menu. Return: returns to the OVERVIEW menu.
TV_DVD_LCD_en 17/06/02 11:45 Page 12 Other settings The explanations given on this page will enable you to access the Personal Settings menu. Customizing Display the OVERVIEW by pressing tv menu button, select Installation line and confirm with ok. The INSTALLATION OVERVIEW is displayed. Select the Personal settings line. Confirm with ok to display the menu. Return: returns to INSTALLATION OVERVIEW menu. Menu language: select your preferred language for menus.
TV_DVD_LCD_en 17/06/02 11:45 Page 13 Teletext Used in many countries under various names (TOP Text, Fastext, FLOF text, Videotext), Teletext is a free service offered by television channels.The service consists of information database (weather, sports results, news, games, etc.) available at all times. Press the text button to display the Teletext Index page (page 100) or the last called page. A message will tell you if there is no Teletext on the channel that you are watching.
TV_DVD_LCD_en 17/06/02 11:45 Page 14 DVD menus This page shows you the different menus available in DVD mode. If the TV/DVD set is in stand-by mode, switch it on by pressing the PLAY button of the remote control. If the TV/DVD set is in TV mode, press the tv/dvd button of the remote control or keyboard.The main menu provides access to all the other menus described in the following pages.
TV_DVD_LCD_en 17/06/02 11:45 Page 15 Remote control : DVD functions This page only describes the remote control’s DVD functions. Refer to page 4 for a description of the TV functions and page 5 for a description of how to use the remote control with other equipment. The keypad buttons located on the front of the TV/DVD have similar functions to those on the remote control. NAVIGATION BUTTONS THE OTHER BUTTONS If the set is in TV mode, press the tv/dvd button. To put your TV/DVD set in stand-by.
TV_DVD_LCD_en 17/06/02 11:45 Page 16 Playback – types of discs Several playback modes are available.This page deals with simple playback mode. For the other playback modes, see the next page.This page also contains information about the various disc types accepted by the player. Standard playback 1 Insert the disk as shown in the illustration on page 2, with the printed side facing you (for single-sided disks).
TV_DVD_LCD_en 17/06/02 11:45 Page 17 Playback modes To access the various playback modes, select the PLAY MODE menu using the confirm. Use the or button to select a mode, and press ok to confirm. / buttons, and press ok to 1 Standard Play is for normal disc playback. 2 Random Play mode activates a random playback. This mode is only available for Audio CDs. 3 In Program Play mode, playback occurs in the order specified in the list entered using the “Edit Program” screen.
TV_DVD_LCD_en 17/06/02 11:45 Page 18 Locking your DVD player This function allows you to control access to discs with rating limits. Select the Lock option in the main menu and press ok to confirm.The LOCK menu appears with the following options: 1 To activate the player lock, you must enter a password. 2 Enter a four digits code with numeric buttons on your remote control, and press ok to confirm. If this is the first time you enter the code, confirmation will be requested.
TV_DVD_LCD_en 27/06/02 10:58 Page 19 Display and Sound The DISPLAY menu enables you to choose the image format and the Info displays. The Digital output line enables you to choose the type of sound assigned to the digital output.To reproduce the sound of a movie theatre from the sound recorded on your Dolby Digital DVDs, connect a Dolby Digital amplifier/decoder to the optical digital audio output jack and select the sound type in the Digital output line.
TV_DVD_LCD_en 17/06/02 11:46 Page 20 Language selection During the initial installation (page 6), the language you choose during the first step has automatically been selected for the DVD part. Nonetheless, you may change the language for the player menus, and choose the languages you prefer for dialogues, subtitles and disc menus.You can change the language for any disc during playba, see page 22. Select the Languages line from the Main menu using then press ok to confirm.
TV_DVD_LCD_en 17/06/02 11:46 Page 21 Info Menus The Info menu can be used to access information on a disc being played, as well as other particuliar functions. This page describes the direct access and repeat play functions. Audio CD info menu DVD info menu Video CD info menu To display all the information, press the PLAY button to start playback and press the info (yellow) button on the remote control. EN Direct access A DVD may contain several titles, which may be different films or programmes.
TV_DVD_LCD_en 17/06/02 11:46 Page 22 Info Menus Start reading a disc with the PLAY button, then press the info (yellow) button of the remote control. Markers (DVD and Audio CD) The player can store up to 5 locations on the disc, as long as the disc remains in the player (and if the TV/DVD set has not been switched off using the On/Off switch). During that time, you can directly access any of these locations.
TV_DVD_LCD_en 27/06/02 10:58 Page 23 Connections Your TV/DVD has a number of sockets which can be used to connect different types of equipment. This page contain a description of the various sockets and relevant connections. AV1 SCART socket (input-output) at the back of the TV/DVD. These sockets can be used to connect a VCR or a camcorder (VHS, S-VHS, 8 mm ou Hi 8), a decoder, a satellite receiver, a DVD player, a games console or any device producing an RGB signal.