User Guide

3EC 17766 BAAA TCZZA Ed. 01

1 SpeedTouch™570 Installation

The configuration

procedure

Step Action

1 Once the the SpeedTouch™ Setup wizard has detected the SpeedTouch™570

device you can proceed with the configuration procedure.

If more than one SpeedTouch™ device is listed, select the appropriate one.

Then, click Next to proceed.

Note If the SpeedTouch™570 has been configured before, it may be

protected by a system password. You must provide this password

before you can view the device details or continue with the config-

uration.

2 The following window invites you to select the appropriate connection profile

for your Internet connectivity:

Select the connection profile and click Next to continue.

Note If the Service Provider included a separate disk with a dedicated

connection profile, click Have disk to navigate to the location of

the appropriate connection profile file.

3 Subsequent screens will guide you through the configuration setup of both

your SpeedTouch™570 and/or your PC. Follow the instructions and enter the

required information where needed. This information should be provided by

your Service Provider.

4 In final step all configurations will be applied to the SpeedTouch™570 and

your PC. You can follow the configuration progress in following window: