U s m a n U a a 4 a l e n M l r u s m a e n U r u s m 1 e S r u 1 a 5 l U T
Mains connection The TV is suitable for use on a.c. mains supply, 220-240V, 50 Hz only. It must not be connected to d. c. mains. The mains lead of the TV is fitted with a moulded plug. If the mains sockets are not compatible or if for any reason the plug is removed please follow these directions: The moulded plug cannot be rewired and if removed must be disposed of safely. DO NOT under any circumstances plug the severed plug into any mains socket as this could result in electric shock.
Connections 2
1. Aerial Socket Enables connection of the aerial and, if required, a video recorder (see manual for latter). To tune the channel reserved for your video recorder, start up the recorder then carry out MANUAL CHANNEL SETTING operations. Store at any programme ending with a 9 (9,19,29, etc.) Each time you use the video recorder, switch to the channel assigned to it. 2. SCART Socket This is used to connect: – a VHS, 8 MM, S–VHS or Hi–8 video recorder or camcorder, – a PAY TV decoder, – a video games console.
Remote Control Display programme No. and sleep timer (Yellow button) Stand-by Inactive Display Timer Menu (Green button) Call upTeletext/Fastext (purple key) Call up personal adjustments Adjustment: move to Right/Left in menus and select one of the proposed options (Red button) Confirm an action or validate a menu option To go to Picture and Channel Adjustment menus To leave a menu Move Up and Down in the menus Volume level To change programme Sound mute To switch to connected equipment (e.g.
Automatic Channel Setting This set is equipped with an automatic search system which will search for and store all channels available in your region. To help identify the programmes, we suggest that you have to hand a TV guide or daily newspaper. Ensure that the aerial lead is connected to the TV set. Check that any equipment connected only via the aerial (video recorder or satellite equipment) is operating. Switch off any equipment connected via the SCART socket.
Changing a Programme Number Select the channel number to be changed using the button. AUTO INSTALL. Using the numerical keypad on the remote control, enter the new programme number. UK VL PR01 You can also use the Press the buttons on the remote control. button to confirm the change. The programmes stored under the old and new numbers are then swapped. Repeat this operation to change other programme numbers. Erasing a Programme Select the programme to be erased using the button.
Manual Channel Setting Press the button twice to call up the channel setting menu. Select the broadcasting standard using the buttons. 1. Channel Search Select the 2nd line of the menu using the button. Start the search by pressing: – the button for a forward search, – the button for a backward search. UK VL The search fully covers the VL, VH and U bands starting PR from the channel on the screen. The cursor moves and as soon as a channel is found, the picture appears on the screen.
3. Fine Tuning Only necessary in the event of interference If fine tuning is necessary, select the 3rd line of the menu using the button. UK VL buttons. If necessary, adjust the picture using the PR Select the 4th line (PR) using the button to allocate a programme number to the channel and store it in memory (see Programme Number and Storing in Memory) If a channel has required fine tuning, it will be stored in memory with the AFC (Automatic Frequency Control) deactivated.
Picture Adjustments Press the button to call up the Picture Menu. BRIGHTNESS COLOUR CONTRAST Select the function to be adjusted using the SHARPNESS TINT buttons. The tint function is only active in NTSC mode. Adjust as required using the buttons. Storing Personal Adjustments You can store the adjustments you have just made and call them up at a later stage. Caution: these personal adjustments will replace and delete the standard settings made at the factory.
Day to Day Operation Switching On - Selecting Programmes Switch on the television set using the main ON/OFF switch if the indicator is off. If it is on, enter the desired programme number. For programmes 1 to 9: Press the corresponding number on the remote control. For programmes 10 to 99 (e.g. 24) : Press and hold the decimal (tens) number (2): 2 then press the units (4) number briefly: 2 4 Volume Adjustment - Sound Mute Press the buttons to turn the sound up or down. button to turn the sound off.
Teletext and Fastext Press the purple button to call up the Index page (page 100). Page Selection Enter the number of the desired page (this must have 3 digits) using the numerical keys on the remote control – E.g. for page 170, enter 1, 7, 0. As soon as the page has been found, it is displayed on the screen. Press the button to call the next page. Press the button to call the last page.
SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. Do read the Operating Instructions before you attempt to use the equipment.
PERITELEVISON (SCART) PIN CONNECTIONS VIDEO INPUTS Composite video or sync: SIGNAL SELECTION Pin 20 (pin 17 return). RGB: Red Pin 15 (pin 13 return). Green Pin 11 (pin 9 return). Blue Pin 7 (pin 5 return). VIDEO OUTPUT Composite video: Facilities are provided for automatic switching when the equipment connected provides switching voltages as follows: Pin 8: + 9.5 V to + 12 V Auto switching to auxiliary O/AUX channel. Pin 16: + 1 V. to + 3 V. Auto switching to RGB.
T H O M S O N m u l t i m e d i a Sales UK Limited Crown road Enfield Middlesex EN 1 1DZ 208 610 70 -2-
