Getting Started Guide

17TouchScreen TCA 400 Getting Started Guide – Installation
8
Plug Touchscreen’s AC adapter into
the wall outlet, and replace the center
screw through the bracket hole.
Remove the center screw from the wall
outlet.
9
Rating
Input
Output
100~120VAC 50/60Hz
12VDC/1.5A
HOME HUB DESIGN INTENT
V 001
08.14.15
10 of 11
[ COMCAST CONFIDENTIAL]
Home Hub Power Supply
Power supply should follows similar look and feel to the
Home Hub. See CAD “150630_HH PSU.STP”
10
After a few seconds, the Installation
Welcome screen is displayed on
Touchscreen.
The maximum distance for the sensors to communicate with IMPORTANT NOTE:
Touchscreen is 50 feet. However, the distance can be limited occasionally by the materials
for the walls, electrical interference, and other conditions. Installation is in accordance with
National Electrical Code, ANSI/NFPA 70-1996, and National Fire Alarm Code, NFPA 72-1993,
Chapter 29.
If Touchscreen does not display the Installation Welcome screen, you must reset it to NOTE:
factory default.