User's Manual

E-DOC-CTC-20061027-0003 v2.0
SNTP Commands
667
sntp config
Modify/display the SNTP client configuration.
SYNTAX:
where:
EXAMPLE:
sntp config [state = <{enabled | disabled}>]
[poll = <number{1-60}>]
[pollpresync = <number{1-60}>]
state Enable or disable the Thomson ST SNTP client.
The default is enabled.
OPTIONAL
poll A number between 1 and 60 (minutes).
Represents the time interval for the SNTP client to poll the configured
NTP server and, if needed, (re-)synchronize its internal clock.
The default is 60.
OPTIONAL
pollpresync polling interval before first sync (1 min, ... ,60min) OPTIONAL
=>sntp config
SNTP configuration:
state = enabled
poll interval = 60 minute(s)
poll interval (before first sync) = 60 minute(s)
=>