User's Manual

atm Commands

E-DOC-CTC-20071119-0014 v1.0

atm qosbook ctdadd

Add a new connection traffic descriptor.

SYNTAX:

atm qosbook ctdadd name = <string>

conformance = <{UBR|CBR|VBR|UBR.1|UBR.2|

UBR.mdcr|CBR.1|VBR.1|VBR.2|VBR.3|VBR.c|VBR.nt|

VBR.t|GFR.1|GFR.2}>

[peakrate = <number{0-27786}]>

[sustrate = <number{0-27786}]>

[maxburst = <number{48-12240}]>

[minrate = <number{0-27786}]>

[maxframe = <number{0-255}]>

[celldelay = <number]>

[realtime = <{enabled|disabled}]>

[framediscard = <{enabled|disabled}]>

where:

name The name for the new CTD entry. REQUIRED

conformance The ATM service conformance definition. REQUIRED

peakrate The peak rate (in kilobits per second). Use '0' to

indicate linerate for UBR.

OPTIONAL

sustrate The sustainable rate (in kilobits per second).

(VBR only)

OPTIONAL

maxburst The maximum burst size (in bytes). (VBR or GFR) OPTIONAL

minrate The minimum rate (in kilobits per second).

(UBR.m or GFR)

OPTIONAL

maxframe The maximum frame size (in bytes). (GFR only) OPTIONAL

celldelay Cell delay variation in tenths of microseconds. OPTIONAL

realtime Enable/disable realtime traffic (VBR only). OPTIONAL

framediscard Enable/disable frame discard. OPTIONAL