AV Control Receiver Operating Instructions Model No. SA-DX1050 SA-DX950 SA-DX1050 Note: “EB” on the packaging indicates the United Kingdom. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference.
Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. These operating instructions are applicable to models SADX1050 and SA-DX950, however, are intended primarily for model SA-DX1050. Model SA-DX1050 is only for Europe. Table of contents Before use Supplied accessories................................................................3 Safety precautions .....................................................................
Supplied accessories Safety precautions Placement Please check and identify the supplied accessories. AC mains lead...................................................................1 Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life. Do not place heavy items on the unit.
Caution for AC Mains Lead (For United Kingdom) (“EB” area code model only) For your safety, please read the following text carefully. WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN/YELLOW. THIS PLUG IS NOT WATERPROOF–KEEP DRY. Before use This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug.
Control reference guide 1 2 3 4 5 6 7 8 9 10 11 12 VOLUME INPUT TAPE/MD VCR1/VCR2 (TAPE MONITOR) SFC MODE 13 14 15 16 TV DVD CD TUNER PHONO INPUT SELECTOR WAKE DIGITAL INPUT DOWN UP SPEAKERS A B RDS TIMER MODE TIME MEMORY TAPE MONITOR DSP SOUND MODE PRESET PTY SELECTOR DVD 6CH INPUT HELP RESET TUNING DISPLAY MODE BAND BASS/TREBLE – + BALANCE L R VCR 1 VCR 2 FM MODE EON PTY SEARCH VCR 2 PHONES 17 18 19 20 21 22 23 24 25 26 27 L AUDIO IN R 29 28 30 kHz MHz SPEAK
Connections Stereo phono cable White (L) Red (R) Video connection cable To connect equipment, refer to the appropriate operating instructions. Note ¡Turn off all components before making any connections. ¡Use digital connection to enjoy Dolby Digital or DTS (\ page 18). ¡Use analogue connection to enjoy sources that cannot be decoded on this unit and to record a source (\ pages 16, 19 and 26). Peripheral equipment and cables sold separately unless otherwise indicated.
Optical fiber cable Coaxial cable Connecting audio equipment a Turntable GND FRONT LOOP ANT HOLDER b Only for turntable with ground terminal.
Connections Antenna connections When mounting the antenna to a column, wall or rack FM antenna Fix the other end of the antenna where reception is best.
FM outdoor antenna How to use the antenna plug (included) ¡Disconnect the FM indoor antenna. ¡The antenna should be installed by a competent technician. Only for Australia and New Zealand Two types of wire are most commonly used for connection from the antenna: 300 Ω parallel feeder wire or 75 Ω coaxial cable. For best resistance to outside interference, the use of 75 Ω coaxial cable is suggested. For Europe ¡ To connect a 75 Ω coaxial cable q Remove a piece of the outer vinyl insulator.
Speaker connections Placement of speakers Front speakers a Center speaker Place on the left and right of the TV at seated ear height so that there is good coherency between the picture and sound. b Front speaker (left) c Front speaker (right) 30° 30° Center speaker Place underneath or above the center of the TV. Aim the speaker at the seating area. d Subwoofer Surround speakers Place on the side of or slightly behind the seating area, about one meter higher than ear level.
Center speaker 6-16 Ω Speaker impedance: FRONT TV MONITOR OUT R S-VIDEO VCR1 DVD IN IN A L + – L IN 2 TV VCR1 MONITOR a Center OUTspeaker DVD/DVD 6CH CENTER SURROUND COAXIAL SPEAKERS IN L SURROUND R IN TAPE REC (OUT) IN SUBWOOFER TV PLAY (IN) (OUT) FRONT (IN) L CENTER FRONT R B L R SUBWOOFER + (OUT) AC IN L – R b Speaker cable 6-16 Ω Speaker impedance: FRONT TV MONITOR OUT R S-VIDEO VCR1 DVD IN IN CAL2 VD) TV e Surround speaker (left) – VCR1 DVD/DVD 6C
Customizing your receiver Change the settings to suit your speakers and equipment and to suit the environment in which the unit is to be used. Before making any changes, read the following descriptions, note the factory settings and ranges, and refer to the instructions for the speakers and equipment. FRONT CENTER SUB-WFR SURROUND LARGE SMALL FRONT CENTER, SURROUND NONE SMALL LARGE YES SUB-WFR NO The settings remain intact until they are changed, even after the power is turned off.
Customizing your receiver 1 2,5 4 Basic steps If you allow about 10 seconds to elapse between settings, the procedure is canceled, all settings are returned to how they were, and the previous display is restored. Begin again if this occurs. 1 2 3 3 4 Press [8]. Press [A] and [B] at the same time. Press [A] to select the item you want to change. Each time you press the button: SIZE/DISTANCE/FILTER/DR COMP/D-INPUT/ DIMMER ↑ 1 4 Change the settings (a below).
Customizing your receiver SPEAKERS A, B For front speakers with an impedance under 6 Ω Turn “LOW IMP“ on if even one of your speakers has an impedance under 6 Ω. Press and hold [A] or [B] until “LOW IMP” lights up on the display. Press and hold down again to cancel “LOW IMP”. Note that when “LOW IMP” is on, SPEAKERS A and B cannot be used at the same time.
Adjusting speaker output level 1 Adjust the level of the speakers so they are the same apparent level as the front speakers when you are sitting where you would normally enjoy a source. 1 Press [A] to turn on SPEAKERS A. You cannot adjust output level when SPEAKERS B is on. 2 DISPLAY 4 DSP sound mode switches to SURROUND mode.
DSP sound modes DSP SOUND MODE DIGITAL INPUT The digital sound processor (DSP) in this unit can decode Dolby Digital and DTS digital signals. It automatically determines the type of signal, PCM, Dolby Digital, or DTS, and processes it accordingly. The DSP can add surround-like effects to stereo sources (analogue or PCM signals). Choose from the STEREO, SURROUND, or SFC modes. The DSP may interfere with radio reception. You can turn it off if this occurs (\ page 22).
DSP sound modes A SFC MODE DSP SOUND MODE A SFC modes Enjoy an enhanced sound experience with greater presence and spread by using these SFC (sound field control) modes with PCM or analogue stereo sources. The SFC modes cannot be used if the input signal is Dolby Digital or DTS. Choose from the following modes. HALL Imparts the reflection and spread of a large concert hall. CLUB Conveys the exciting and intimate atmosphere of a jazz club.
Enjoying the sounds 1 2 4- 4- 6 2 3 1 1 Press [8]. 2 Press [SPEAKERS A]. “SURROUND” and “SFC” do not work if you select “B”. 3 Turn [INPUT SELECTOR] to select the input source. (SA-DX1050) The indicator corresponding to the selected source lights. DIGITAL INPUT To switch between analogue and digital input (CD, DVD, and TV) Press [DIGITAL INPUT]. Each time you press the button: ANALOG , / DIGITAL The indicator lights when you select “DIGITAL”.
Enjoying the sounds SPEAKERS B DVD 6CH INPUT A To switch between DVD 2 channel and 6 channel input There may be times when you need to use analogue input for DVD, such as to enjoy sources recorded with MPEG, linear PCM and multiple channel linear PCM. Select the analogue input mode to suit the source. DVD: For two-channel audio. DVD 6CH: For multiple channel audio. Press [DVD 6CH INPUT].
Enjoying the sounds 1 2 A Adjusting the tone and balance A You can adjust the tone (BASS and TREBLE) only when the DSP sound mode is STEREO and input is either analogue or PCM. You cannot adjust the tone while the DSP is defeated or if DVD 6CH INPUT is selected. 1 Press [BASS/TREBLE, BALANCE]. Each time you press the button: BASS / TREBLE / BALANCE ↑ BASS: To adjust the bass TREBLE: To adjust the treble BALANCE: To adjust the left/right sound balance 1 BASS/TREBLE 2 Press [–, L] or [+, R].
Enjoying the sounds TAPE MONITOR A Muting the volume Press [MUTING]. The message “MUTING ON NOW” runs repeatedly from right to left across the display as long as the muting function is on. To cancel Press [MUTING]. Muting is also canceled when the unit is turned off.
The radio 3 2 A 1 Manual tuning A You can tune radio stations manually by selecting the station’s frequency, or you can preset up to 30 stations into channels to make tuning simpler (\ page 23). FM MODE DSP SOUND MODE 1 Turn [INPUT SELECTOR] to select “TUNER”. 2 3 Press [BAND] to select “FM” or “AM”. Press [TUNING 2 or 1] to select the frequency of the station. “TUNED” lights when tuned. “STEREO” lights during FM stereo broadcasts.
The radio MEMORY A C Preset tuning Choose either automatic presetting, which presets the stations the tuner can receive, or manual presetting, which allows you to select the stations to preset and the order in which they are to be preset. There are 30 channels available for presetting. Remember If a new station is preset into a channel, the old station is erased.
RDS broadcasts 12 A 1 Only for Europe RDS (radio data system) is a multiplex broadcasting system where, along with FM audio signals, stations transmit other signals to help you enjoy radio more and tune into programs easier. This unit can use the following types of signals. Some stations do not have PTY, EON, and RT. ¡PS (Program service): Station name. ¡PTY (Program type): Displays the program type (a below) and is used to search for a type of program (a page 25).
RDS broadcasts 12 3 A A Only for Europe EON tuning EON puts the unit on standby to receive programs that are going to be broadcast on a station that shares RDS signals with the current station. Preset FM stations before proceeding. EON tuning does not work if the unit is not receiving EON signals (“NO EON” is displayed.) 1 2 1 Press [RDS]. While “RDS” is flashing Press [TUNING, PTY SELECTOR, 2, 1] to select the program type. RDS MHz RDS 3 While the PTY display is flashing Press [BAND, EON].
Making a recording 1 A 2 Note ¡You cannot record a source connected through a digital terminal. When recording CD, DVD, or TV, ensure the source is connected through the corresponding analogue terminals (\ pages 6–7) and “ANALOG” input is selected (\ page 18). ¡When you select DVD 6CH INPUT mode, only sound from the front left and right channels is recorded.
Timer function For Europe 3 There are two timer functions: the sleep timer and the wake timer. 12 Note ¡ Sleep timer: The unit turns off after a set time. It can be set for 30, 60, or 90 minutes. ¡ Wake timer: The unit can be set to turn on a certain number of hours after it is turned off. It can be set for 5, 7, or 9 hours. Setting the timers 1 WAKE For Australia and New Zealand 3 12 2 Press [TIMER, -MODE, –TIME] to select the desired timer mode.
The HELP function -HELP –RESET If you make a mistake in operation or if sound output stops, the HELP function displays information that indicates how you can remedy the situation. If “ERROR” or scrolling characters (“SPEAKER OFF NOW”, for example) appear on the display, do the following. Press [-HELP, –RESET]. The remedy for the situation is displayed. For your reference You can reset the unit’s settings to the factory settings.
Troubleshooting guide Before requesting service, make the below checks. If you can’t fix the system as described below, or if something not listed here occurs, refer to the enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer. No power. ¡Ensure the AC mains lead is connected. No sound. ¡Turn the volume up. ¡Turn muting off. ¡Check connections to speakers and other equipment. ¡Turn on the speakers. ¡Turn off the tape monitor. ¡Select the correct source.
Specifications (DIN 45 500) ■ AMPLIFIER SECTION ■ FM TUNER SECTION Power output (at 230 V for Continental Europe) (at 240 V for the United Kingdom, Australia and New Zealand) DIN 1 kHz (T.H.D. 1 %) 2 x 100 W (6 Ω) [SA-DX1050] 20 Hz–20 kHz continuous power output both channels driven 2 x 80 W (6 Ω) [SA-DX950] 40 Hz–20 kHz continuous power output both channels driven 2 x 80 W (6 Ω) Total harmonic distortion [SA-DX1050] rated power at 20 Hz–20 kHz 0.09 % (6 Ω) [SA-DX950] rated power at 40 Hz–20 kHz 0.
Reference MEMO 31 RQT5802
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPLIANCE TO RAIN, SPLASHING, DRIPPING OR MOISTURE. CAUTION! DO NOT INSTALL, OR PLACE THIS UNIT, IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
