Operating instructions

Playing back
English
(19)
3
Press [RESET] to light the pitch
control RESET LED lamp.
The unit plays at a preset pitch (33-1/3, 45
or 78 rpm) regardless of the [PITCH ADJ]
position.
5
Lower the cue lever slowly.
The tone arm moves down slowly.
Play starts.

Fine adjustment to
pitch (

20)


To temporarily stop play
Lift the cue lever.

The stylus lifts off the record.

To start play again, lower the cue lever.


When play finishes

Lift the cue lever, return the tone arm to the
arm rest and lower the cue lever.

Press [START-STOP].
The electronic brake gently stops the
turntable.

Turn [ON/OFF] to turn the unit off.

Clamp the tone arm with the arm clamp.

Put the stylus cover back on (to protect the
stylus tip).


To light up the stylus
The stylus tip is illuminated during play.
Stylus light
Press the stylus light.

The stylus light (white LED) rises up and
illuminates the stylus.

Press down the stylus light to turn off the
light.


When playing EP records

Press the speed select button [45] ([45]
lights).

Fit the EP record adaptor over the center
spindle.


When playing SP (78 rpm) records

Enable 78 rpm with the 78 rpm setting
(

17).

Press the speed select buttons [33] and [45]
at the same time (78 rpm: [33] and [45]
light).


When using a record stabilizer
(not included)

See the instruction manual of the record
stabilizer.

Maximum weight: 1 k
g
ヱリヵヤラチモュル
ンユヴユヵ
RESET
button
RESET LED
lamp
4
Lift the cue lever and move the
tone arm over the record.
Cue lever
19


To play in reverse

Enable reverse playback with the Reverse
playback setting (

17).

Simultaneously press the turntable speed
select button or buttons ([33], [45] or [33]
and [45]) and [START-STOP] while the
turntable is rotating.

Reverse playback starts at the turntable
speed selected by pressing the speed select
button or buttons.

To return to normal playback, press [START-
STOP] again while pressing the turntable
speed select button or buttons.

Pressing [START-STOP] again after pressing
[START-STOP] during reverse playback starts
normal playback.

Simultaneously pressing the turntable speed
select button or buttons and [START-STOP]
with the turntable stopped starts reverse
playback.