Manualshelf

Owner's Manual

ManualsBrandsTechnics ManualsAudioSL-1210GR
12345678910
Table Of Contents
Technics
Read before
use
Direct Drive Turntable System
Model No. SL-1200GR / SL-1210GR
■
Make
connection
to
the PHONO terminals and
AC
IN
terminal before setting up or
installing the player.
Connecting
to
the PHONO terminals and
AC
IN
terminal
CD
Take
out the player from the package, attach the "
FRONT
styrofoam" and place the player
with
its
front
side
down
so
that you
can
make connection
to
the
PHONO
terminals and
AC
IN
terminal on the back side.
® Connect the supplied
PHONO
cable (product number: K2KYYYY00257),
PHONO
earth lead (product number:
K4EY1
YY00160), and
AC
power supply cord (product number: K2CG3YY00191
).
Insert the
AC
power
supply cord up
to
a point just before
the round hole.
Connecting
the
PHONO earth lead
to
the
♦
4iHY,ot•ii•
Be
careful not
to
tip over
the player.
FRONT
styrofoam
player and amplifier.
CD
Turn the terminal
to
the left
to
loosen.
@Insert the earth lug and tighten
the terminal securely.
■
Before
fitting the turntable ("Before fitting the turntable" on page 15)
There
is
a magnet and
its
cover on the back
side
of
the turntable.
Remove the magnet cover before fitting
to
the main unit.
Magnet
•41i§bH•i••
Fixing
screw
•
Keep
any magnetic-sensitive object
such
as
a magnetic card and watch away from the magnet.
• Prevent the turntable from hitting the main unit or falling off.
Prevent dust or iron powder from adhering
to
the magnet on the back
side
.
•
Do
not touch the fixing screws (three locations)
of
the turntable.
The
rating performance cannot
be
guaranteed
if
they
are
out
of
position.
English
I
IIIIIIII
IIIII
IIII
IIIIII
Ill
lllll
lllll
lllll
111111111111111111
TQBM7019-1
S1017AK1

Summary of content (60 pages)