Owner's Manual
Table Of Contents
- Operating Instructions
- Read first
- Table of contents
- Features
- Accessories
- Control reference guide
- Connections
- Operations
- Settings
- Sound adjustment
- Adjusting the volume of headphones "PHONES VOL”
- Using this unit exclusively for the playback of CDs "Pure Disc Playback”
- MQA decoding "MQA Decoding”
- Enabling the native playback for DSD signal "DSD Native”
- Disabling audio output "Digital Output”/“Analog Output”
- Setting the sampling frequency "D.Output fs”
- Setting the analogue audio output "A.Output Level”
- Adjusting the sound quality of analogue audio output "Filter”
- Setting the limitation ofheadphones output "PHONES VOL Limitation”
- Playing back CD more natural-sounding audio
- Direct mode
- Other settings
- Using the favourite function
- System control connection
- Sound adjustment
- Others
25
Connections
Connecting to an amplifier
You can output analogue audio signals from
this unit and play back music.
Connecting to an amplifier
XLR cable
*
(not supplied)
Analogue audio
cable (supplied)
Amplifier
Amplifier with
unbalanced input
terminals
Amplifier with
balanced input
terminals
*
: We recommend using cables with a length of
3 m or less.
• For details, refer to the operating instructions of
the connected device.
• Do not use any other analogue audio cables except
the supplied one.
• When you connect a power amplifier, etc., set
“A.Output Level” to “Variable” for volume control
with this unit. When you connect a pre-amplifier,
etc., set “A.Output Level” to “Fixed” for volume
control with the connected device. (⇒ 79)
The factory default is “Fixed”.