Owner's Manual
Table Of Contents
- Operating Instructions
- Read first
- Table of contents
- Features
- Accessories
- Control reference guide
- Connections
- Operations
- Settings
- Sound adjustment
- Adjusting the volume of headphones "PHONES VOL”
- Using this unit exclusively for the playback of CDs "Pure Disc Playback”
- MQA decoding "MQA Decoding”
- Enabling the native playback for DSD signal "DSD Native”
- Disabling audio output "Digital Output”/“Analog Output”
- Setting the sampling frequency "D.Output fs”
- Setting the analogue audio output "A.Output Level”
- Adjusting the sound quality of analogue audio output "Filter”
- Setting the limitation ofheadphones output "PHONES VOL Limitation”
- Playing back CD more natural-sounding audio
- Direct mode
- Other settings
- Using the favourite function
- System control connection
- Sound adjustment
- Others
47
(Continued)
Using a USB HDD
When using a USB HDD with this unit, connect a
USB HDD to the USB-A terminal (USB Rear) on the
rear of this unit and switch the input source to “USB
Rear”.
Note
• Do not connect a USB HDD to the USB-A terminal
(USB Front) on the front of this unit.
Add a track to playlist
You can add your favourite track to playlist.
1 Press [NWP].
2 Press [
], [ ] to select a track to add.
3 Press [MENU].
4 Press [
], [ ] to select “Add to Playlist”
and then press [OK].
• “Added” is displayed after adding.
• You can add up to 1000 tracks to playlist.
• The playlist can be registered and set for each
input source of “USB Front” and “USB Rear”.
Note
• The playlist cannot be played back properly with
the other USB device except the registered one.
When the contents of USB device is changed or
another USB device is connected, delete all tracks
and add them again.
• The setting is deleted when AC mains lead is
disconnected. It may also be deleted when this
unit is turned off while “Network Standby” is set
to “Auto” or “Off”.
Calling up the playlist
1 Press [NWP].
2 Press [
], [ ] to select “Playlist” and
then press [OK].
3 Press [
], [ ] to select a track and then
press [OK].