Owner's Manual
Table Of Contents
- Operating Instructions
- Read first
- Table of contents
- Features
- Accessories
- Control reference guide
- Connections
- Operations
- Settings
- Sound adjustment
- Adjusting the volume of headphones "PHONES VOL”
- Using this unit exclusively for the playback of CDs "Pure Disc Playback”
- MQA decoding "MQA Decoding”
- Enabling the native playback for DSD signal "DSD Native”
- Disabling audio output "Digital Output”/“Analog Output”
- Setting the sampling frequency "D.Output fs”
- Setting the analogue audio output "A.Output Level”
- Adjusting the sound quality of analogue audio output "Filter”
- Setting the limitation ofheadphones output "PHONES VOL Limitation”
- Playing back CD more natural-sounding audio
- Direct mode
- Other settings
- Using the favourite function
- System control connection
- Sound adjustment
- Others
79
(Continued)
Setting the analogue audio output
“A.Output Level”
You can set the analogue audio output level is fixed
or adjustable when changing the volume with this
unit. (⇒ 25)
• The factory default is “Fixed”.
• The factory default of the analogue audio output
level is “-60.0 dB” when setting to “Variable”.
• -- dB (min), -99.0 dB to 0 dB (max)
• Set “Analog Output” to “On” to use this function.
Adjusting the sound quality of
analogue audio output
“Filter”
You can adjust the sound quality of an analogue
audio output. Set as your favourite with listening to
the actual sound.
• The factory default is “Mode 1”.
• Set “Analog Output” to “On” to use this function.
Note
• Adjustment is not available when “MQA
Decoding” is set to “On”.
Setting the limitation of
headphones output
“PHONES VOL Limitation”
You can set an upper limit on the headphones
output to avoid the extremely high volume when
turning this unit or playing back.
• The factory default is “On”.