Operating instructions

ManualsBrandsTechnics Manualsaudio & home theatreSP-10R

Before

use

English

(08)

English

(09)

08 09

Accessories

In order to prevent damage during shipping some of the equipment has been disassembled.

Please check and identify the supplied accessories.

AC mains lead (1 pc.)

(K2CG3YY00191)

AC mains lead (1 pc.)

(K2CM3YY00041)

AC mains lead (1 pc.)

(K2CS3YY00033)

AC mains lead (1 pc.)

(K2CT3YY00081)

Turntable mat (1 pc.)

(RGS0008)

EP record adaptor (1 pc.)

(TEKX077)

Screw set for turntable (1

set

)

(TYL0194)

Screws-long (3 pc.)

Washers (3 pc.)

Belleville springs (3 pc.)

Turntable (1 pc.)

(TYL0195)

Detachable handle (2 pc.)

(TXQ0020)

The model numbers of the accessories are as of February 2018.

They are subject to change without notice.

Keep the packaging materials after taking out the goods.

You will need them when carrying the product for a long distance.

Follow the local regulations when disposing of the product.

Do not use any other AC mains lead except the supplied one.

Keep the auxiliary weight, screws and washers out of reach of children to prevent swallowing.

IMPORTANT SAFETY INSTRUCTIONS

(continued)

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

receiver.

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV

technician for help.

FCC Caution:

To assure continued compliance, follow the attached

installation instructions and use only shielded interface

cables when connecting to peripheral devices.

Any changes or modifications not expressly approved by

the party responsible for compliance could void the user's

authority to operate this equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

Responsible Party:

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, NJ 07102-5490

Support Contact: http://shop.panasonic.com/support

The following mark and symbols are located on

bottom of the unit.

Conforms to UL STD 62368-1.

Certified to CAN/CSA STD C22.2 No.62368-1.

THE FOLLOWING APPLIES ONLY IN CANADA.

CAN ICES-3(B)/NMB-3(B)

Information on Disposal in other

Countries outside the European Union

This symbol is only valid in the European

Union.

If you wish to discard this product, please

contact your local authorities or dealer and

ask for the correct method of disposal.

English

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the

safety instructions on the unit and the applicable safety instructions listed

below. Keep these operating instructions handy for future reference.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding-

type plug has two blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when

unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed

to rain or moisture, does not operate normally, or has been dropped.

Unit

≥ To reduce the risk of fire, electric shock or product damage,

– Do not expose this unit to rain, moisture, dripping or splashing.

– Do not place objects filled with liquids, such as vases, on this unit.

– Use only the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to qualified service personnel.

– Do not place heavy items on this unit.

AC power supply cord

≥ The power plug is the disconnecting device.

Install this unit so that the power plug can be unplugged from the socket

outlet immediately.

Unit

≥ Do not place sources of naked flames, such as lighted candles, on this unit.

≥ Do not put any objects on this unit. This unit becomes hot while it is on.

≥ Do not touch the output terminals of the speakers with your hands or other

objects while the speakers are in use. Depending on the conditions of use,

doing so may expose you to high voltage.

Placement

≥ To reduce the risk of fire, electric shock or

product damage,

– Do not install or place this unit in a bookcase,

built-in cabinet or in another confined space.

Ensure this unit is well ventilated.

– Do not obstruct this unit’s ventilation openings

with newspapers, tablecloths, curtains, and