Operating instructions
Control reference guide
English
01 Standby/on switch (Í/I)
≥
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
02 Power indicator
≥ Blue: The unit is on.
03 STATUS indicator
This is a two-color LED indicator that shows the SSD status.
≥ It flashes blue when this unit is on.
04 CD indicator
This is a two-color LED indicator that shows the CD status.
≥ It flashes blue when you insert a CD into this unit.
05 CD tray
06 Opens/closes the CD tray
≥ The tray opens or closes after the CD indicator flashes.
07 Network connection indicator
08 LAN terminal (> 16, 17)
09 Network communication speed indicator
10 USB terminal ( DC 5 V 500 mA AUDIO OUT) (> 20)
≥ Connects to a device with a built-in USB-DAC.
11 USB terminal ( DC 5 V 900 mA IMPORT/BACKUP) (> 19)
≥ Connects to a USB memory device or USB HDD (Hard Disk Drive).
12 Storage tray (STORAGE)
≥ You can remove the tray to attach and remove the SSD. (> 23)
13 Fixing screw
14 Product identification marking
15 AC IN terminal ( ) (> 16, 17)
OFF
Not possible to access SSD
Lights up (blue)
Possible to access SSD
Lights up (red)
Importing from USB / Downloading from
Technics Tracks / Backing up / Restoring
Flashing (red)
The SSD is not formatted
OFF
No CD
Lights up (blue)
Possible to access the CD
Lights up (red)
Recording CD music
Flashing (red)
Incompatible CD
OFF
Disconnected
Lights up (yellow)
Connected
Flashing (yellow)
Making a connection
OFF
Disconnected/10 Mbps connection
Lights up (Orange)
100 Mbps connection
Lights up (green)
1 Gbps connection
13
(13)
ST-G30-SQT1222_mst.book 13 ページ ２０１６年２月２２日 月曜日 午後５時５２分