Operating instructions

Connections
English
3
1 Connect the device with a built-in USB-DAC.
This unit will output audio signals, allowing you
to play back music files.
≥ See the operating instructions for connected
equipment for operational details.
≥ The USB connection is not required for the
playback of music using the DLNA function.
2 Wired LAN connection
Normally, just connecting a LAN cable will
complete the setup.
≥ Use category 7 or above straight LAN cables
(STP) when connecting to peripheral devices.
3 AC power supply cord connection
Connect only after all other connections are
completed.
お知らせお知らせ
Note
≥ This unit consumes a small amount of AC
power (> 30) even when the unit is in standby
mode. Remove the plug from the main electrical
outlet if you will not be using the unit for an
extended period of time. Place the unit so the
plug can be easily removed.
≥ While the AC power supply cord is disconnected,
the LAN cable must be connected or
disconnected.
≥ Inserting any cable other than a LAN cable in the
LAN port can damage the unit.
To a household AC
outlet
¢
AC power supply cord (supplied)
17
¢ Insert the AC power supply cord up to a point just before the round hole.
(17)
ST-G30-SQT1222_mst.book 17 ページ ２０１６年２月２２日 月曜日 午後５時５２分