Operating instructions

Troubleshooting
Troubleshooting
This unit becomes warm when used for a long time.
This is not a malfunction.
Panasonic is constantly improving the unit’s
firmware to ensure that our customers are enjoying
the latest technology.
Check the support site below
www.technics.com/support/
When the following situations occur, reset the memory:
≥ There is no response when buttons are pressed.
1 Disconnect the mains plug.
≥ Before proceeding to Step 2, wait for at least
3minutes.
2 Connect the mains plug while pressing and
holding [Í/I].
The main unit will turn off after all the indicators
on its front side flash.
≥ All settings will return to the factory defaults. It
is necessary to set the memory items again.
Follow the steps below to delete music or settings
stored on the SSD of this unit.
≥ You want to clear and reset the memory contents.
1 Start the app “Technics Music App”.
2 Tap “ST-G30 Menu“, and then tap “Technics
ST-G30******“.
≥ “******“ stands for a digit that is unique to
each set.
3 Tap “Settings“, and then tap “Initialize“.
4 Tap “Delete account information“ to delete
your account information.
≥ To clear account information, select “OK“.
5 Select “Format SSD“ in Step 4, and repeat the
same operation.
The unit does not work.
Operations are not done properly.
≥ One of the unit’s safety devices may have been
activated.
1Press [Í/I] on the unit to switch the unit to
standby.
≥ If the unit does not switch to standby, press
[Í/I] on the unit for at least 5 seconds. The
unit is forcibly switched to standby.
Alternatively, disconnect the AC power supply
cord, wait for at least 3 minutes, then
reconnect it.
2Press [Í/I] on the unit to switch on. If the unit
still cannot be operated, consult the dealer.
A “humming” sound can be heard during
playback.
≥ An AC power supply cord or fluorescent light is
near the cables. Keep other appliances and cords
away from the cables of this unit.
≥ A strong magnetic field near a TV or other device
may adversely affect the audio quality. Keep this
unit away from such devices.
≥ The speakers may output noise when a device
nearby is emitting powerful radio waves, such as
when a mobile phone is on a call.
No sound.
≥ Adjust the volume of the connected device
(amplifier, etc.).
≥
Check to see if the cable connections to the input
and output terminals are incorrect. If this is the case,
turn off this unit and reconnect the cables correctly.
Before requesting service, make the following checks. If you are uncertain about some of the check points, or if
the solutions indicated in the following guide does not resolve the issue, then consult your dealer for instructions.
Heat buildup of this unit
Do you have the latest firmware instaled?
To return all settings to the factory
defaults
To delete music and settings stored
on the SSD
General
24
(24)
ST-G30-SQT1222_mst.book 24 ページ ２０１６年２月２２日 月曜日 午後５時５２分