Operation Manual

ManualsBrandsTechnics ManualsAmplifierSU-G30

Operations

Using digital audio output device

LAN

DIGITAL IN

10BASE-T /

100BASE-TX

OPT COAX1 COAX2 PC

PHONO

EARTH

LINE IN

Using coaxial digital cable

1 Disconnect the AC mains lead.

2 Connect this unit and a CD player etc.

3 Connect the AC mains lead to this unit.

( 17)

4 Press [ ] to turn this unit on.

5 Press [DIGITAL] repeatedly to select

“COAX1” or “COAX2”.

• You can also select the input source by

turning the input selector knob on the unit.

6 Start playback on the connected

device.

Note

• The digital audio input terminals of this unit can

only detect linear PCM signals. For details, refer

to the operating instructions of the device.

- Sampling frequency:

Coaxial digital input

32/44.1/48/88.2/96/176.4/192 kHz

Optical digital input

32/44.1/48/88.2/96 kHz

- Number of quantisation bits:

16/24 bit

You can input digital audio signals to this unit and play

back music.

Optical digital audio cable

(not supplied)

CD player, etc.

Coaxial digital cable