User manual
8
iPod ADAPTORS FINDING AN ADAPTOR
Before docking your iPod you must rst check if your iPod has
a docking connector. Early iPod models (and iPod shue do
not have one and cannot be docked to your unit. The docking
connector is located on the base of the iPod as shown below.
If you don’t have a dock adaptor
If your iPod was not supplied with a standard dock adaptor,
or if you have lost the adaptor, you can buy one from Apple
on-line. To determine the exact model of your iPod, refer to
this web-link - http://support.apple.com/kb/HT1353. You
can then browse the iPod accessories page on the Apple
website to nd an adaptor for your iPod model that can be
purchased on-line.
FITTING THE iPod ADAPTOR
When your iPod was new it may have been supplied with a
standard dock adaptor in the packaging. If so, t the adaptor
by pressing it gently into the Docking Bay as shown above.
NOTE: Do not dock an iPod without tting the correct adaptor,
you may damage the iPod and your unit.
Docking Connector
iPod adaptor
Docking bay
Before docking your iPod, you must rst t the correct iPod
adaptor to the docking bay. Each iPod adaptor matches the
shape of a particular iPod and is necessary to ensure that
your iPod is securely held when docked.