User's Manual

INPUTS & CONNECTIONS

CI Port

REAR CONNECTIONS

Choosing Source

To switch between the different connections.

1) Press [SOURCE] on the remote.The menu

opposite will appear.

2) Press [\/] or [/\] to select the input you

require.

3) Press [OK]

Connecting HD Ready Devices

There are two options for HD.

1) By connecting via HDMI cable (not included)

– this provides both HD picture and sound.

2) By connecting via Component

(YPbPr / Component) cable (not included)

– this provides HD picture. Source should be

set to YPbPr / Component.

To receive sound you will need to connect your left

and right audio to the YPbPr/S-Video Audio.

1. AC POWER INPUT: 100-240V AC 50/60Hz. (Warning: This appliance must be earthed).

2. HDMI 1 / 2: Connect to the HDMI sockets of DVD player or other equipment.

3. VGA: PC Display. Connect to the D-Sub 15 pin connector of PC.

4. PC AUDIO : Connect to Audio output of PC sound card.

5. S-VIDEO: Connect to S-Video socket of DVD player or similar equipment (video only).

6. YPbPr :

L/R in: Connect them to the audio output terminal of DVD.

Connect all to video output connectors of DVD or similar equipment.

7. VIDEO(CVBS): Connect to AV connector of DVD or similar equipment (Video only).

8. L/R in: Connect to audio output connectors of DVD or similar equipment when using S-Video connectors.

9. SCART 1 / 2: Connect to Scart connector of DVD or similar equipment.

SCART 1: supports CVBS (AV) and RGB signal inputs.

SCART 2: supports CVBS (AV) only.

10. RF: TV tuner input. 75 Ohm coaxial socket.

DVD

MAIN POWER SWITCH