SP114 Owner’s Handbook Portable speaker for iPhone with FM radio
IMPORTANT SAFETY INFORMATION CAUTION! RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
INTRODUCTION INDEX INDEX Introduction.............................................................2 Unpacking................................................................2 Connecting power....................................................2 Controls & connections.............................................3 Fitting the batteries..................................................5 Selecting a source and setting the volume...............5 Sound equaliser..................................................
CONTROLS AND CONNECTORS FRONT VIEW a b c d Handle iPod docking bay Play/Pause button Source select button e f g h EQ button Standby On/Off button Display Next button 3 i Volume up button p Volume down button q Previous button
CONTROLS AND CONNECTORS EXTENDING THE AERIAL To extend the aerial: • Extend the aerial fully out of the main unit. BACK VIEW • Rotate the base of the aerial until the pivot screw is visible from the back (arrowed). a FM Aerial b Aux In jack c DC Jack DISPLAY • Raise the aerial into a vertical position.
FITTING BATTERIES Batteries may be fitted to power your docking station for portable operation and also to provide backup power to retain preset memories when mains power is disconnected. To fit batteries: 1. Slide the battery cover in the direction shown to unclip the latch. Lift off the battery cover. SELECTING A SOURCE You can choose to play music from a docked iPod, FM radio or a personal audio player or other source connected to the AUX IN jack on the rear panel.
iPod ADAPTORS Before docking your iPod you must first check if your iPod has a docking connector. Early iPod models and iPod shuffle do not have one and cannot be docked to your unit. The docking connector is located on the base of the iPod as shown below. Docking Connector Before docking your iPod, you must first fit the correct iPod adaptor to the docking bay. Each iPod adaptor matches the shape of a particular iPod and is necessary to ensure that your iPod is securely held when docked.
PLAYING FROM AN iPod Once an iPod is docked, you can play the iPod and operate some of the functions from the controls on your docking station. Selecting iPod playback mode: • Press the SOURCE button repeatedly to select iPod mode. NOTE: iPod mode will select automatically if an iPod is docked while the unit is set to FM or AUX mode. The unit will revert back to the original selected mode when the iPod is removed. Playback functions: When you dock an iPod it will switch on, set to pause mode.
CARE AND MAINTENANCE AFTER USING THE DOCKING STATION • Set to Standby. • Switch the unit off at the mains and unplug it if you are leaving it unattended for a long period (holidays etc). CARE AND CLEANING All care and cleaning operations should be carried out with the unit unplugged from the mains power. Occasionally wipe the cabinet with a lint free duster. Never clean the unit with liquids or solvents. SPECIFICATIONS SPECIFICATIONS AC Adaptor input:............. 100-240V~, 50-60Hz, 0.
Tesco Stores Ltd, Delamare Road, Cheshunt, Herts, EN8 9SL Technika Helpline: 0845 456 6767 (Calls cost up to 4p per minute from a BT landline, other providers may vary) SP114 V0.