Instructions

81
DE
EN
FR
NL
16.3.5 WLAN connection on standby
> Under [WLAN Active on Standby], select whether the WLAN connection is to
be maintained in standby mode (YES) or not (NO).
Note that, for unrestricted and smooth use and operation via the TechniSat
CONNECT App, this function must remain switched on.
The TechniSat CONNECT App can be downloaded from your smartphone's App
store.
16.4 Time and date seings
16.4.1 Manually seing the date/time
Depending on the seing for time updates (Section 16.4.2), the date and time might
have to be set manually.
> Press the MENU buon and use the / buons to select the [System
Seings] > [Time and Date] item.
> Press the ENTER buon.
> Use the / buons to select the [Set Date/Time] item and press ENTER.
> The first digits (day) of the date flash and can be changed using the /
buons.
> Press the ENTER buon to apply the seing.
> The next date digits (month) then start to flash and can again be changed as
described above.
> Press the ENTER buon aer every additional seing in order to go to the
next seing.
> Proceed with the time in the same way as described above.
> Aer all seings have been made and the ENTER buon pressed for the last
time, [Time Saved] appears on the display.
16.4.2 Updating
Here you can specify whether time updates should be carried out automatically
via the Internet, DAB+ or FM, or whether you wish to enter them manually (Section
16.4.1).
> Press the MENU buon and use the / buons to select the [System
Seings] > [Time and Date] > [Update] item, then press ENTER.
> Use the /buons to select the following options:
[Update from DAB] (Update via DAB+ only)
[Update from FM] (Update via FM only)