Instructions

83
DE
EN
FR
NL
16.6 Language
> Press the MENU buon and use the /buons to select the [System
Seings] > [Language] item, then press ENTER.
> Use / to select one of the available languages and confirm by pressing the
ENTER buon.
16.7 Factory seings
If you change the location of the device, e.g. when moving house, it is possible that
the saved stations can no longer be received. In this case you can reset the device to
factory seings to delete all the saved stations and launch a new scan.
> Press the MENU buon and use the /buons to select the [System
Seings] > [Factory Seings] item, then press ENTER.
> Use / to select the [Yes] option, then press ENTER to reset to the factory
seings.
All previously stored stations and seings will now be deleted. The device is
now in the same status as when delivered.
> [Restarting...] appears on the display.
The device will switch to standby aer successfully reseing to the factory
seings. You will then need to run the initial installation wizard.
16.8 Soware update
The Soware Update feature is used to update the device soware.
> Press the MENU buon and use the /buons to select the [System
Seings] > [Soware Update] item, then press ENTER.
Auto update
> Enable this function so that the DIGITRADIO 370/371 CD IR automatically
searches for new soware versions during operation. If new soware is found,
a note will appear in the display. Note the information on the screen and do
not switch the device o during the soware update.
Check now
> Select [Check Now] to launch an immediate search for a new soware version
on the Internet. Note the information on the screen and do not switch the
device o during the soware update.
16.9 Set-up wizard
Here the initial set-up wizard can be accessed again. For more details, see Section „6
Ersteinrichtung“ auf Seite 62.