Quick start manual

7.4.6 Returning to last channel selected

> Press the Back button on the remote control to return to the last channel selected.

> Press the button again to return to the channel you were previously watching.

7.4.7 Switching between TV/radio

> Use the TV/Radio button to switch between TV and radio mode.

The unit switches to the last radio channel listened to.

Alternatively you can also switch between TV and radio operation as described

in sections 7.4 and 10.

7.4.8 Info box

Every time you change channels, an info box appears on the screen for a period as defined

according to section 8.8.1.3 in your operating manual.

You can also call up the info box manually by pressing the Info button on the remote con-

trol.

This Infobox displays the location and name of the selected channel, the title of the current

programme and the currently active channel list.

The progress bars are coloured yellow according to the amount of transmission time

already expired for the current programme. If the beginning of the progress bar is

coloured red, the transmission started too early, and if the end of the progress bar

is coloured red the current programme has overrun.

Additional programme properties are also displayed:

For example:

for teletext

for 16:9 broadcasts

for encrypted channels

for Dolby Digital broadcasts

for subtitles

for HbbTV

The current time is shown in the right-hand upper corner of the screen.