Quick start manual

49
15 ISI mode
A wide range of functions and added value options make television with TechniSat an
amazing and complex experience with unlimited possibilities. ISI mode reduces this diver-
sity of available options and is therefore ideal for children or older people who feel unsure
about using the many different possible settings when operating the unit. If this mode is
activated, it will not be possible to accidentally change any settings using the remote control.
ISI mode also provides simplified channel information in extra-large text size on the screen
for persons with poor or impaired vision and integrates a highly legible digital time display
on request.
> Activate ISI mode as described in section 8.8.1.6 in your operating manual.
When ISI mode is active, the following functions are deactivated:
- Automatic updates
- Films / DVR / Music / Images
- Internet / HbbTV
- watchmi
- Mobile apps
- UPnP renderer
- WLAN direct - TechniCast
- EPG / Timer
Access to various menus is also blocked, however it is still possible to access the
menu for the purpose of deactivation.
ISI mode can also be used with the IsiZapper remote control which is optimised for
ISI mode. See also section 3.3 (optional Isi Zapper remote control).
15.1 Switching the unit on/off (ISI mode)
> When the receiver is on standby, you can switch it on by pressing the On/Standby
button on the remote control/on the receiver.
> When operating normally you can switch the unit into On/Standby mode by pressing
the On/Standby button.
15.2 Program selection(ISI mode)
15.2.1 Using the channel up/down buttons
> To select a channel, use the up/down arrow buttons on the receiver or the
Channel +/- on the remote control to scroll up or down the channel settings.
15.2.2 Using the numeric pad keys
> Use the numeric keypad to enter the number of the desired channel.
For example: