Quick start manual

16 Software updates via USB interface

In addition to the automatic software updates via the internet and DVB sources, you also

have the option of updating the receiver software via the USB interface or via the SD/MMC

card reader.

To be able to run the software update via the USB interface or the SD/MMC card

reader, you first need to download the current software version from the Technisat

homepage (www.technisat.de).

The update can be performed using a standard USB flash stick and an SD/MMC

card which has been formatted in FAT32 format.

> Now copy the software file with the file extension “.cpad” onto the stick or the SD/

MMC card.

> If you only want to run a single update, copy the singleupdate file, or for several

updates, copy the autoupdate file onto the USB stick or the SD/MMC card.

Please note that the singleupdate and autoupdate files must not have a file

extension! Please also note here that, to do so, your folder settings on your PC must

be set to hide file extensions.

The USB stick or SD/MMC card should not contain multiple cpad software files.

Furthermore, the "autoupdate" and "singleupdate" files must not be present

at the same time.

> Now switch the receiver to stand-by and insert the USB flash stick into the receiver's

USB port or insert the SD/MMC card into the SD /MMC card reader on the receiver.

Now switch on the receiver.

The update process is now displayed in the following steps.

- The message "Loading software from data medium" will now appear

- Then a progress bar appears showing the progress of the software loading

operation.

- Once the software has downloaded to 100%, another progress bar appears,

one showing the progress of the individual update steps and the other showing

the overall progress of the update.

The display shows the progress of the software download and the individual update

steps.

> Once the update is complete, the TV image appears again. You can now switch the

receiver to standby and remove the USB stick or SD/MMC card.

The update should not be interrupted at any point by removing the USB stick or the

SD/MMC card, or by switching off the power supply, as this can cause the receiver

to malfunction.