1 Inhaltsverzeichnis 1 Inhaltsverzeichnis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Lieferumfang / Abbildungen . . . . . . . . . . . . . . . . . . . . . . . . . . .3 3 Bitte zuerst lesen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 3.1 3.2 3.3 3.4 3.5 Bestimmunsgemäßer Gebrauch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Herstellererklärung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Lieferumfang / Abbildungen Ladeschale (Sender) 1 2 3 4 LED Power/Signal und Ladekontrolle Ladekontakte Audio IN DC-IN Kopfhörer (Empfänger) Links 5 6 7 8 9 Rechts Lautstärke +/LED Verbindungsanzeige Ladekontakte Ein/Aus LED Power-Kontrolle 3
Zubehör 12 10 11 12 Audio-Kabel (Cinch-Klinke) 2 NiMH-Akkus für Kopfhörer Steckernetzgerät 3 Bitte zuerst lesen Bevor Sie mit der Inbetriebnahme des Gerätes beginnen, überprüfen Sie zunächst die Lieferung auf Vollständigkeit. 1 Ladeschale (Sender), 1 Kopfhörer (Empfänger), 1 Steckernetzgerät, 1 Audiokabel, 2 Akkus, 1 Bedienungsanleitung 3.1 Bestimmunsgemäßer Gebrauch - Benutzen Sie dieses Gerät aussschliesslich in trockenen Räumen und nicht anders, als in der Bedienungsanleitung beschrieben.
3.2 Herstellererklärung Hiermit erklärt TechniSat, dass der Funkanlagentyp StereoMan 2 der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: http://konf.tsat.de/?ID=9962 3.3 Sicherheit Zu Ihrem Schutz sollten Sie die Sicherheitsvorkehrungen sorgfältig durchlesen, bevor SIe Ihr neues Gerät in Betrieb nehmen.
3.4 Entsorgung Die Verpackung Ihres Gerätes besteht ausschließlich aus wiederverwertbaren Materialien. Bitte führen Sie diese entsprechend sortiert wieder dem “Dualen System” zu. Dieses Produkt darf am Ende seiner Lebensdauer nicht über den normalen Haushaltsabfall entsorgt werden, sondern muss an einem Sammelpunkt für das Recycling von elektrischen und elektronischen Geräten abgegeben werden. Das -Symbol auf dem Produkt, der Gebrauchsanleitung oder der Verpackung weist darauf hin.
4 Betrieb 4.1 Ein- und Ausschalten Sender > Stecken Sie zunächst das Steckernetzgerät in eine Netzsteckdose (230V/50Hz). > Stecken Sie nun den DC-Stecker des Steckernetzgerätes in die DC-IN-Buchse des Senders. Nun blinkt die rote Power/Signal-LED für ca. 5 Sekunden. > Verbinden Sie den Sender nun durch das beiliegende Audio-Kabel mit der SignalQuelle (TV-Gerät, DVD-Player, MP3-Player usw.). > Schalten Sie nun die Signal-Quelle ein.
Kopfhörerer (Empfänger) > Zunächst müssen Sie die wiederaufladbaren Akkus in den Kopfhörer einsetzen. > Entfernen Sie dazu vorsichtig das Ohrpad. > Setzen Sie nun die beiliegenden Akkus in die dafür vorgesehenen Fächer ein. Achten Sie dabei unbedingt auf die richtige Polung! > Befestigen Sie das Ohrpad anschließend wieder am Kopfhörer. 4.2 Bedienung 4.2.1 Sender > Schalten Sie die Audio-Quelle, mit der der Sender verbunden ist, ein.
Links Rechts Power-LED (rot) Signal-LED (grün) > Setzen Sie den Kopfhörer auf und stellen Sie ihn möglichst komfortabel ein. Dazu können Sie die Ohrmuscheln aus dem Kopfbügel herausziehen. > Stellen Sie die gewünschte Lautstärke mit den Tasten Lautstärke +/- ein. Wenn es zu Verbindungsproblemen zwischen Sender und Empfänger kommt, wird der Kopfhörer automatisch stummgeschaltet. Die Signal-LED leuchtet nicht und das Gerät sucht automatisch den besten Empfangskanal. 4.2.
Laden (grün) 4.2.4 Wichtige Hinweise Zur Energieeinsparung wird der Sender automatisch abgeschaltet, wenn für ca. 3 Minuten kein Audio-Signal anliegt. Sobald wieder ein Audio-Signal zur Verfügung steht, schaltet sich der Sender automatisch ein. Schalten Sie dann bitte auch den Kopfhörer wieder ein. Der Kopfhörer wird ebenfalls automatisch abgeschaltet, wenn der Sender für ca. 3 Minuten kein Signal bereitstellt. Schalten Sie den Kopfhörer aus, während er geladen wird. Verwenden Sie die beiliegenden Akkus.
Verwenden Sie keinen anderen Akku-Typ oder nicht wiederaufladbare Batterien, um die mitgelieferten Akkus (LR03/AAA) zu ersetzen. Schalten Sie den Kopfhörer aus, wenn er nicht genutzt wird. Das Hören mit hoher Lautstärke kann zu dauerhaften Schädigungen führen. 5 Fehlersuchhilfen Kein Ton > Vergewissern Sie sich, dass das Steckernetzgerät mit einer Netzsteckdose und dem DC-Eingang des Senders verbunden ist. > Vergewissern Sie sich, dass der Kopfhörer eingeschaltet ist.
Technische Daten Netzteil Hersteller Modellkennung Eingangsspannung Eingangswechselstromfrequenz Ausgangsspannung Ausgangsstrom Ausgangsleistung Durchschnittliche Effizienz im Betrieb Leistungsaufnahme bei Nulllast TechniSat Digital GmbH, Julius-Saxler-Straße 3, D-54550 Daun YLS0041A-E050055 AC 100 - 240 V 50/60 Hz DC 5,0 V 0,5 A 2,7 W 70,6 % 0,09 W Dieses Produkt ist qualitätsgeprüft und mit der gesetzlichen Gewährleistungszeit von 24 Monaten ab Kaufdatum versehen.