1 Inhaltsverzeichnis 1 2 3 Inhaltsverzeichnis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Lieferumfang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Bitte zuerst lesen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 3.1 3.2 3.3 3.4 3.5 3.5.1 Bestimmunsgemäßer Gebrauch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Allgemeine Hinweise zu diesem Gerät . . . . . . . . . . . . . . . . . . . .
2 Lieferumfang 1 2 3 4 5 6 7 Funk-Kopfhörer Basis-Ladestation 2 Akkus Netzteil zur Stromversorgung der Basis-Ladestation Adapterkabel Chinch/Klinke Klinken-Anschlußkabel Stereo 3,5mm Klinkenadapter 3,5mm auf 6,3mm Zusätzlich: 2 Paar Ohrhörer-Schutzkappen 3
3 Bitte zuerst lesen Lesen Sie diese Bedienungsanleitung sorgfältig durch und bewahren Sie sie gut auf. Bevor Sie mit der Inbetriebnahme des Gerätes beginnen, überprüfen Sie zunächst die Lieferung auf Vollständigkeit. Achtung - Kennzeichnet einen wichtigen Hinweis, den Sie zur Vermeidung von Gerätedefekten, Datenverlusten/-missbrauch oder ungewolltem Betrieb unbedingt beachten sollten. Tipp - Kennzeichnet einen Hinweis zur beschriebenen Funktion sowie eine im Zusammenhang stehende und evtl.
Vermeiden Sie Belastungen durch Rauch, Staub, Erschütterungen, Chemikalien, Feuchtigkeit, Hitze oder direkte Sonneneinstrahlung. Da die heutigen Möbel mit einer unübersehbaren Vielfalt von Lacken und Kunststoffen beschichtet sind und mit unterschiedlichen Pflegemitteln behandelt werden, ist es nicht auszuschließen, dass manche dieser Stoffe die Kunststoff-Füße des Gerätes angreifen und erweichen. Die so veränderten Gerätefüße können auf der Oberfläche der Möbel unliebsame Spuren hinterlassen.
Nehmen Sie das Gerät nicht in der Nähe von Badewannen, Swimmingpools oder spritzendem Wasser in Betrieb. Versuchen Sie niemals ein defektes Gerät selbst zu reparieren. Wenden Sie sich immer an eine unserer Kundendienststellen. Fremdkörper, z.B. Nadeln, Münzen, etc., dürfen nicht in das Innere des Gerätes fallen.Die Anschlusskontakte nicht mit metallischen Gegenständen oder den Fingern berühren. Die Folge können Kurzschlüsse sein. Es dürfen keine offenen Brandquellen, wie z.B.
3.5.1 Hinweise zum Akku Achtung: Werfen Sie Akkus oder Batterien nicht ins Feuer. Verwenden Sie nur die für das Gerät vorgeschriebenen Akkus! Achten Sie auf die richtige Polung! Gefährdung von Gesundheit und Umwelt durch Akkus und Batterien! Akkus und Batterien nie öffnen, beschädigen, verschlucken oder in die Umwelt gelangen lassen. Sie können giftige und umweltschädliche Schwermetalle enthalten.
4 Bedienung 4.
4.
4.3 Erste Inbetriebnahme 4.3.1 Basis-Ladestation 1 Stecken Sie das eine Ende des mitgelieferten Netzteils in die DC-In (8) Buchse der Basis-Ladestation und das andere Ende in eine Steckdose. 2 Stecken Sie das Klinken- Anschlußkabel in die Audio-In (11) Buchse an der Basis-Ladestation und das andere Ende in die jeweilige Audioquelle. Benutzen Sie ggf. einen Adapter. 3 Alternativ können Sie ein geeignetes optisches Audiokabel mit der der optischen Buchse (10) verbinden.
4.3.2 Kopfhörer 1 Stecken Sie einen Akku in das Akkufach des Kopfhörers (9). Achten Sie dabei auf die richtige Ausrichtung des Akkus. 4.3.3 Akkus Laden Laden Sie den Akku vor dem ersten Gebrauch. Schalten Sie ggf. den Kopfhörer AUS (Off). Stellen Sie den Kopfhörer wie abgebildet in die Ladeschale der BasisLadestation. Die Ladeanzeige (5) leuchtet rot während der Akku geladen wird (ca. 2,5 Stunden). Ist der Akku voll geladen, leuchtet die Ladeanzeige grün.
4.4 Zusätzliche Funktionen 4.4.1 Ohrhörer-Schutzkappen austauschen Im Lieferumfang sind 2 Paar Ohrhörer-Schutzkappen (L=groß/S=klein) entahlten. Ein Paar ist bereits am Kopfhörer montiert. 1 2 Zum Austauschen der Ohrhörer-Kappen, greifen Sie die Spitze der montierten Ohrhörer-Kappe und ziehen sie einfach ab. Schieben Sie die Austausch-Ohrhörer-Kappe auf die offenen Enden und lassen Sie sie einrasten. 4.4.
Wenn der Akku fast leer ist, hören Sie kurze Pieptöne im Minutenabstand im Hörer. Der Kopfhörer wird nach ca. 5 Minuten automatisch abgeschaltet. Fester Sitz Ihres Kopfhörers ist wichtig für beste Klangqualität und optimale Lautstärke. Am Beginn der Nutzung können manche Anwender Druck in den Ohren empfinden, der nach mehrmaliger Nutzung durch das Öffnen und Schließen der elastischen Bügel nachlässt. Achten Sie beim Aufsetzen der Kopfhörer darauf, diese im oberen Bereich auseinander zu ziehen. 4.5.
4.5.3 Einstellung der Sprachverständlichkeit Die Sprachverständlichkeit können Sie an der Basis-Ladestation einstellen. Durch wiederholtes Drücken der Taste (siehe Abbildung) leuchten die Anzeige-LEDs 1,2,3 oder keine. Die folgende Tabelle zeigt die möglichen Einstellungen. Probieren Sie, welche Einstellung Sie bevorzugen.
5 Fehlersuche 5.1 Kein Ton - Überprüfen Sie den korrekten Anschluss der Basis-Ladestation an das Stromnetz. Kontrollieren Sie den Schalter am Kopfhörer (Stellung On) Möglicherweise ist der Akku im Kopfhörer entladen. Stellen Sie den Kopfhörer zum Laden in die Basis-Ladestation oder tauschen Sie den Akku gegen den geladenen Ersatzakku aus. Prüfen Sie, ob das Gerät, von dem Sie den Ton hören wollen (Fernseher, Radio, etc.), eingeschaltet ist und ein Sender eingeschaltet ist, der Ton sendet.
6 Technische Daten Übertragung 2,4 GHz Digital ISM BAND I Sendefrequenz 2400 - 2483,5 Mhz Sendeleistung max.
8 Notizen 17
9 Anhang Konformitätserklärung Hiermit erklärt TechniSat, dass der Funkanlagentyp StereoMan ISI 2 der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: http://konf.tsat.de/?ID=23137 Die Konformität mit der o. a. Richtlinie wird durch das CE-Zeichen auf dem Gerät bestätigt. Dieses Produkt ist qualitätsgeprüft und mit der gesetzlichen Gewährleistungszeit von 24 Monaten ab Kaufdatum versehen.
25102021-V4 20