Instructions

106
15.8 SW info
> You can view the soware version currently installed the device under MENU > Main Menu > System Seings > Info.
16 Cleaning
To avoid the risk of electric shock, do not clean the device with a wet cloth or under running water. Remove the mains
plug prior to cleaning!
Do not use scourers, scouring powders or solvents such as alcohol, benzine, methylated spirit, thinners, etc., as they could
damage the surface of the device.
Do not use any of the following substances: salt water, insecticide, chlorine or acidic solvents (ammonia).
Clean the housing with a so cloth moistened with water.
Clean the display with a so coon cloth only. If required, use the coon cloth with a reduced volume of non-alkaline,
diluted water-based soap solution.
Rub the surface with the coon cloth gently until it is completely dry.