Instructions
76
4.4.3 Source selection
> Press the MODE buon on the device (1) or on the remote control (14) multiple times to scroll through the available
sources.
The currently selected source is shown in the display.
4.4.4 Adjusting the volume
> Turn the VOLUME/ knob on the device (3) to decrease or increase the volume.
On the remote control, use the VOL+/- rocker buon (15).
The adjusted volume is shown in the display during the control process.
If the volume is turned down completely, the device switches to standby mode aer about 15 minutes.
4.4.5 Activating the mute function
> You can mute the volume using the audio mute buon (13). “Mute” appears in the display and in the status bar.
> Pressing the buon again switches the sound back on.
4.4.6 Menu operation
The menu is divided into the menu for the respective source and into the system seings that apply to all sources. Operation
within the menus is carried out using the SCROLL&SELECT knob (7) on the device or with the up/down arrow buons (10)
and the OK buon (9) on the remote control.
> Turn the SCROLL&SELECT knob (7) to the right and le or press the up/down arrow buons (10) on the remote control
to move the highlight or change the highlighted value.
> By turning the SCROLL&SELECT knob (7) or pressing the OK buon (9) on the remote control, you can confirm a
selection to enter a submenu or to save the set value.
If a value has been changed, this is saved. If there is an arrow (>) next to a menu item, you can access additional seings
or functions.