User Manual

73
DE
EN
FR
NL
18.2.2 More information about the network connection
> To find out more about the current connection select Show seings.
> Select Manual seings, if you know your network parameters and you would
like to configure them manually. Take note of the instructions on the display.
> Select Delete network profile, to delete connections no longer required.
> Under NetRemote PIN you can configure a PIN for remote access (e.g. using
the TechniSat CONNECT app).
> Select Allow WLAN connection in standby mode if the WLAN connection
should be retained in standby mode as well. This seing increases power
consumption but enables App control via the TechniSat CONNECT app.
18.3 Time seings
> Press the MENU buon and then select [Main Menu > System Seings >
Time and Date].
> Select [Time/Date Seing] to set the time and date manually.
Use the  or  buons to select a value. Change it using the  or 
buons.
> Confirm by pressing OK.
> Select [Update seings] to determine whether the time update should be
automatic via DAB+, FM or Internet or whether you would like to enter it
manually.
> To do this, select [DAB+ update], [FM update], [NETupdate] or [No
update].
> Under the [Set format] option you can activate the 12 or 24 hour format.
Confirm your selection with the OK buon.
> Under [Set time zone], select the current time zone in your location (only for
Internet updating).
> Under [Summertime] you specify whether summertime should currently be
active (only for Internet updating).
18.4 Language
> Press the MENU buon and then select [Main Menu > System Seings >
Language].
> Using  or  select the language and confirm the selection by pressing OK.