User Manual

1.1 Open the computer housing as per the manufacturer’s instructions.

1.2 Locate a free PCI / PCIe slot for your PCI/PCIe card and remove the

cover plate. (Fig. 1)

1.3 Before touching the PCI/PCIe card, discharge any static electricity

from your body by touching an appropriate earth point. (Fig. 2)

1.4 Only hold the PCI/PCIe card by its outside edges. Insert it  rmly

but carefully into the slot until it engages in the correct position.

TechniSat does not accept any liability for damage caused by

incorrect installation. (Fig. 3)

1.5 PCIe card: PCIe card require a separate power source supplied via

cable from the PC power supply and  tted to the connector on the

PCIe card. If this connection is not made, the operating system will

not recognise the card.

Therefore the software and drivers will not be installed. (Fig. 4

and 5)

1.6 After you have closed up the computer housing, connect up your TV

cable (satellite, cable or aerial), power cable and any other cables

that were previously disconnected. (Fig. 6)

1.7

Switch on your computer. Windows will recognise the new hardware and

ask for a driver for the PCI/PCIe card. Insert the installation CD provided

and start the installation process.