Operation Manual

28
29
Connections AudioMaster BT
1
Power Inlet
2
Output – Ext. Subwoofer
3
Input – TV (optical)
4
Input – DVD (coaxial)
5
Input – AUX (analogue)
6
Jack service (TechniSat)
Setting up the
remote control
Place the battery supplied in the remote control. Be careful
to ensure that it is correctly inserted according to the polarity
markings (+/–). You should only use the battery specified for
this system (CR 2032).
Note
The batteries provided are designed for test use and may
therefore have a shorter lifespan.
Connection Terminal
AudioMaster BT
SUB OUT
Ser v ice
Remote control
EnglishEnglish
CR 2032
Installation
The TechniSat AudioMaster BT should be positioned underneath the
screen on a flat surface. Capacity up to 40 kg.
Unpacking
Unpack the box carefully and check that all the following
parts are present:
• 1x TechniSat AudioMaster BT
• 1x Remote control inc. battery
• 1x Mains cable
• 1x optical digital audio cable
• 1x stereo RCA cable
• 1x digital RCA cable
Breaking in
Maximum sound quality requires a breaking-in
time of 15 – 20 operating hours.
• During this time operate the loudspeaker at
normal volume
• Avoid high noise levels
• Listen to a variety of music