Operation Manual

32
33
Playback via Bluetooth
Registration requirements
- Bluetooth must be activated on the
mobile end device
- The mobile end device must support
Bluetooth 2.0 at least
- The mobile end device must be within range of
the AudioMaster BT (max. 10 m)
Registration process
- Select
BT
input
- Press the “Bluetooth-Pairing“ button
-
BTP
appears on the display
- You now have 30 seconds to register your mobile
end device
- Start the search run on your mobile end device
- Select “AudioMaster BT ” as the playback device
- Once confirmed, the connection will be made
automatically and will appear as
Con
in the
display
- If the connection fails the message
FAI
will appear
- If the mobile device requires an access code
enter 0000
Operating a mobile end device
- The device most recently connected to the
AudioMaster BT connects automatically when
Bluetooth is activated and the input for Blue-
tooth playback has been selected. In this case
the message
Con
will appear.
- Start the playback of a medium on your mobile
end device and the sound will automatically be
generated by the AudioMaster BT.
Display indications
The AudioMaster BT has a multifunctional display that lights up blue for approx. 5 seconds in response to a remote con-
trol command. The possible readouts and their meanings are shown below. The standby mode of the AudioMaster BT is
indicated by a red LED light. When your AudioMaster BT is in operation this LED is green.
Input
Soundmode
Playmode
TV Input (optical)
TV
Volume (0 – 99)
V30
Stereo
ST
Pairing Mode
BTP
DVD Input (coaxial)
DVD
Mute
---
Surround
SUR
Connection established
CON
AUX input (analogue)
AUX
Bass level (+/–6)
B 6
Disconnected
DIS
Bluetooth
BT
Treble level (+/– 6)
T 6
Error message
FAI
Bluetooth
EnglishEnglish
BT
BTP
Con Fai
- AudioMaster BT -
BLUETOOTH
PAIRING