Bed.Anl. Werra1 englisch 09.04.
Bed.Anl. Werra1 englisch 09.04.1998 11:52 Uhr Seite 2 1 Compact instructions TRAFFIC ANNOUNCEMENT SYSTEM ON/OFF ● Page 15 ALTERNATIVE FREQUENCY SEARCH ON/OFF ● Page 16 Push for more than 2 sec.: REGIONAL ON/OFF ● Page 17 Switching the DISPLAY ● Page 17 Switching: VOLUME/BASS/ TREBLE/FADER ● Page 7/8 Push for more than 4 sec.: INSTALLATION MENU MODE ON/OFF ● Page 10 AST LOUDNESS ON/OFF ● Page 8 Push for more than 4 sec.
Bed.Anl. Werra1 englisch 09.04.1998 11:52 Uhr Seite 3 1 Compact instructions FAST FORWARD/FAST REWIND ● Page 18 Half-push simultaneously: CHANGE TRACK ● Page 18 Full-push simultaneously: CASSETTE EJECT ● Page 18 FREQUENCY UP/DOWN ● Page 13 CODE NUMBER UP/DOWN ● Page 9 STATION SEARCH SWITCHING ● Page 13 Auto/Manual STATION SEARCH SENSITIVITY ● Page 12 Local/DX Radio: STATION SCAN ON/OFF ● Page 14 CD: INTROSCAN ● Page 21 DISCSCAN (push for more than 2 sec.
Bed.Anl. Werra1 englisch 09.04.1998 11:52 Uhr Seite 4 Contents Introduction/radio reception comments 1 Introduction Contents Compact instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2/3 1 Introduction/radio reception/preprogramming comments . . . . . . . . . . . . . . . . . .4/5 Congratulations! You have made a very good choice with buying this TechniSat 2 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bed.Anl. Werra1 englisch 09.04.1998 11:52 Uhr Seite 5 Introduction/radio reception/preprogramming comments Introduction/radio reception/preprogramming comments Medium wave: Long wave: During the day the reception quality of medium wave stations in the lower Generally,long wave reception is comparable to short wave reception.However, frequency range is better than that of stations in the upper frequency range.
Bed.Anl. Werra1 englisch 09.04.1998 11:52 Uhr Seite 6 2 Safety precautions 3 Detailed instructions 2 For your own protection, carefully read the safety precautions before starting to use your new device: 3 Operation 3.1.1 Switching on/off Switching on: - To switch on the unit push the turning knob of the car radio once. The display is not illuminated. If now “C*“ is shown on the display, the security code is activated.
Bed.Anl. Werra1 englisch 09.04.1998 11:52 Uhr Seite 7 3 Detailed instructions 3 Detailed instructions 3.1.2 Volume control 3.1.3 Sound control Proceed as follows: higher: - Push the - Turn the turning knob clockwise. The volume will be increased. SEL button, possibly several times, until the setting you want to change appears.
Bed.Anl. Werra1 englisch 09.04.1998 11:53 Uhr Seite 8 3 Detailed instructions 3 Detailed instructions 3.1.4 Loudness function 3.1.5 Calling the basic settings When the volume is low the human ear perceives bass notes worse than middle By using the reset function the modifications according to chapter 3.1.3 can be or high notes.In order to neutralize this effect the unit is equipped with a loudness removed with one single push. The settings are then set to a mean value.
Bed.Anl. Werra1 englisch 09.04.1998 11:53 Uhr Seite 9 3 Detailed instructions 3 Detailed instructions 3.1.7 Security code Your TechniSat WERRA 1 is equipped with a security code to prevent operation - Turn on the radio as described in 3.1.1. by unauthorized persons after the radio has been removed or disconnected If the device is locked “C*“ will appear on the display. from the power supply.
Bed.Anl. Werra1 englisch 09.04.1998 11:53 Uhr Seite 10 3 Detailed instructions 3 Detailed instructions If you have entered a wrong code the device will switch off after a few Switching on/off the security code: seconds. The message “SEC ERR“ is now shown on the display. Afterwards the Proceed as follows: code has to be re-entered. Turn on the radio (see also 3.1.1). - Push the SEL - After approx. 40 seconds the TechniSat WERRA 1 has accepted the button for approx. 4 seconds.
Bed.Anl. Werra1 englisch 09.04.1998 11:53 Uhr Seite 11 3 Detailed instructions 3 Detailed instructions 3.2 Radio unit Switching between FM and AM band (MW, SW, LW): - With a longer push (approx. 2 seconds) on the BAND button you can The TechniSat WERRA 1 is equipped with a high-quality radio reception unit for switch between the FM and the AM band. the reception bands FM, MW, SW and LW. The following chapter describes how to use these bands and the functions which are connected with them. 3.2.
Bed.Anl. Werra1 englisch 09.04.1998 11:53 Uhr Seite 12 3 Detailed instructions 3 Detailed instructions Calling up the stations memorized as above: 3.2.2 Station search/station memory - Activate the memory positions on which the programmes of the The TechniSat WERRA 1 offers four different possibilities to search for the radio station: manual station search, automatic station search, AST function and selected frequency range have been stored by means of a short push search for the type of programme.
Bed.Anl. Werra1 englisch 09.04.1998 11:54 Uhr Seite 13 3 Detailed instructions 3 Detailed instructions Calling up the station stored as above: Automatic Tuning System: - Shortly push the buttons << or - Push the respective programme memory button( >> 1 - 6 ). The Depending on the button pushed the frequency range will be searched programme which is stored under this number in the selected reception through downwards or upwards. As soon as a station has been found range is called up.
Bed.Anl. Werra1 englisch 09.04.1998 11:54 Uhr Seite 14 3 Detailed instructions 3 Detailed instructions A short push on the respective button will change the frequency by 0.05 MHz; The TechniSat WERRA 1 is now searching for a station with the same when the button is pushed and held for a longer time the frequency runs until programme type. It stops on the first station which corresponds to the selected the button is released. programme type.
Bed.Anl. Werra1 englisch 09.04.1998 11:54 Uhr Seite 15 3 Detailed instructions 3 Detailed instructions Giving priority to automatic traffic announcements S te p 1 By activating this function the operation of the cassette or the CD is interrupted every time an automatic traffic announcement is coming in.
Bed.Anl. Werra1 englisch 09.04.1998 11:54 Uhr Seite 16 3 Detailed instructions 3 Detailed instructions Setting the volume of traffic announcements 3.2.4 RDS functions The volume of the traffic announcement can be set independently of the RDS (Radio Data System) displays, among other things, the following additional normal volume. information broadcast by the station: - Push the SEL button for approx. 5 seconds. - Programme name: “SPKRS“ is indicated on the display.
Bed.Anl. Werra1 englisch 09.04.1998 11:54 Uhr Seite 17 3 Detailed instructions - Shortly push the AF 3 Detailed instructions 3.2.5 Stereo/mono switching button. - The function can be switched off by pushing the AF When receiving weak FM stations it can be advantageous to switch the button again. reception to “mono“ as follows: - Shortly push the button. The present setting is indicated on the display (“MONO“ or “STEREO“). - A further push on the button switches the setting.
Bed.Anl. Werra1 englisch 09.04.1998 11:54 Uhr Seite 18 3 Detailed instructions 3 Detailed instructions 3.3 Cassette unit - Push both buttons The TechniSat WERRA 1 is equipped with a high-quality stereo auto reverse simultaneously, however, only halfway. The running direction changes and the other side of the cassette is played cassette drive mechanism. This is operated as follows: S te p 1 Simultaneously push buttons halfway; cassette changes the running direction 3.3.
Bed.Anl. Werra1 englisch 09.04.1998 11:55 Uhr Seite 19 3 Detailed instructions 3 Detailed instructions 3.3.4 Dolby B noise suppression The TechniSat WERRA 1 is equipped with the Dolby B noise suppression system which clearly improves the reproduction of cassettes recorded with this system. MTL - You can switch on the noise suppression during the reproduction by shortly pushing the A 6 button. symbol appears on the display.
Bed.Anl. Werra1 englisch 09.04.1998 11:55 Uhr Seite 20 3 Detailed instructions 3 Detailed instructions Switching on the CD mode/reproducing a CD: - Shortly push the MODE button. Searching for beginning of next title: The message “CHANGER“ is displayed. button. - Push the S te p 3 The device winds the cassette to the beginning of the next title and Push >> or << to select next resp. previous title switches to reproduction.
Bed.Anl. Werra1 englisch 09.04.1998 11:55 Uhr Seite 21 3 Detailed instructions 3 Detailed instructions Selecting the title: SHUFFLE mode Selecting next title: - Push the >> button to play the next title. Selecting previous title: - Push the << button to play the previous title. The number of the current title appears on the display.
Bed.Anl. Werra1 englisch 09.04.1998 11:55 Uhr Seite 22 3 Detailed instructions 4 Connection 4 Connection 3.5 Additional functions The TechniSat WERRA 1 is equipped with connection sockets according to the Telephone muting ISO standard. In most of the cars with radio preparation the corresponding The TechniSat WERRA 1 is equipped with a muting function which can be used connectors are used. These are plugged into the radio together with the in connection with a car telephone.
Bed.Anl. Werra1 englisch 09.04.1998 11:55 Uhr Seite 23 4 Connection 5 Technical data If your car does not have these connection possibilities you can also connect the device as follows. In that case, the ON/OFF switching function via the ignition 5 Technical data lock is not activated. The same applies to the security LED. Radio unit: Therefore you should absolutely prefer the previous variant. FM Reception range 87.5-108 MHz Tuning raster man./auto.
09.04.1998 11:55 Uhr Seite 24 Quality Made in Germany WERRA 1 is CE-approved and complies with all requested EU standards! E.&O.E. Issue 5/97 TechniSat a are registered trademarks of TechniSat Satellitenfernsehprodukte GmbH · P.O. Box 560 · D-54541 Daun · GERMANY 364/98 Bed.Anl.
