Operation Manual

2. Press  or  to ‘Forced mono’, press SELECT to conrm.

Station Presets (for DAB/DAB+ and FM mode)

Note: Your radio can store 12 DAB/DAB+ and 12 FM stations preset.

While playing your favourite station, press and hold one of PRESETS button 1- 12 to

store current station, then radio will shows “Preset # stored”

Preset Recall (for DAB/DAB+ and FM mode)

To select a stored station, press one of PRESETS button 1- 12, then radio will go

directly to relative preset station.

Bluetooth Mode

Shift to Bluetooth mode

Press MODE buttons until <Bluetooth mode> is showing up.

Note: while enter Bluetooth mode, an icon showing up and blinking slowly, it

means radio is waiting for pairing with a new Bluetooth device or connecting to a

paired Bluetooth device.

Pairing with Bluetooth devices

Pairing occurs when two Bluetooth devices communicate with each other and establish

a connection. A record of information about this connection is then stored in the memory

of each device. Once you pair a device with the radio, you should not have to pair it

again.

To perform pairing with a Bluetooth device

Turn on your Bluetooth device.1.

Set your Bluetooth device to “discover” the2. radio, then check the Bluetooth device

list.

From the Bluetooth device list, select the device named “3. DigitRadio 100”.

If your device asks for a passkey, enter digits 0000 (four zeros) and press4. OK. Some

devices also ask you to accept the connection.

Your Bluetooth device indicates when pairing is complete. The radio indicates pairing is

complete when an  icon remains steadily on.

To pair additional devices

Follow “To perform pairing with a Bluetooth device” steps 1-4.

Clearing memory

The radio memory can hold up to eight paired devices. When the memory is full with