Operation Manual
24
4.3 Preparing the DIGITRADIO 360/361 CD IR for operation
4.3.1 Connecting the device
> Connect the device to the power supply using the mains plug.
Ensure that the operating voltage of the radio coincides with the local mains voltage before you aach it
to the wall socket.
When you connect to the mains for the first time, "TechniSat" appears on the display.
When the device is not being used, remove the plug from the socket.
Remove the plug when there is a storm. Also remove the plug if the device is not to be used for a
prolonged period, e.g. before going on a long trip.
The heat generated during operation must be dissipated by sucient air circulation. Therefore the device
must not be covered or installed in a closed cupboard. Ensure there is free space of at least 10 cm around
the device.