Operation Manual
31
EN
FR
IT
NL
NW
DK
PL
CZ
SK
After approx. 20 seconds without operation, the menu is exited automatically.
> The highlight is moved by turning the SELECT/VOLUME knob (5) on the device or by pressing the r/s
PRESET or VOL-/VOL+ buttons on the remote control (7, 9, 8, 26).
> You can confirm the respectively highlighted item by pressing the ENTER button on the remote control
(27) or the SELECT/VOLUME knob (5) on the device to open or select it.
> By pressing the BACK buon (23) on the remote control, you can go one step back or reach the
respective superordinate menu.
A * highlights the current selection/setting.
5.1 Main menu
The main menu takes you to all the functions and settings for the DIGITRADIO 360/361 CD IR.
> Open the menu by pressing the MENU buon on the remote control(4) or by holding it down (approx. 2
seconds) on the device (6).
If you are currently in a playback source, you can use the MENU button to retrieve the menu for this
source.
> Highlight the Main menu item and confirm with the ENTER buon to switch to the main menu.
5.2 Source selection
> Press the MODE buon (2) on the device as oen as required until the desired source is shown on the
display (4) or press the CD/USB (11), FM/DAB (12), AUDIO IN (30) or INTERNET (29) buons on the
remote control to select the sources directly.
Alternatively:
> Press the MENU buon.