Operation Manual

26
4.3.3 Inserting the baery
> Close the baery compartment lid carefully againto ensure that the lid retaining tabs engage in the
housing.
To operate the remote control, an alkaline battery (type mignon, 1.5 V, LR6/AA) is required. Ensure that the
polarity is correct when inserting.
Change a battery that is losing power promptly.
Leaking batteries can cause damage to the remote control.
If the device is not to be used over a prolonged period, remove the battery from the remote control.
Important information for disposal: batteries can contain poisonous substances which harm the
environment. Therefore, it is imperative to dispose of the batteries according to the legal provisions in
force. Never dispose of batteries in normal household waste.
Never leave the remote control on extremely hot or very wet surfaces.
4.4 General device functions
Settings can be carried out both using the buttons on the device and with the remote control. The description of
the operation refers to the buttons on the remote control.