Operation Manual
42
> Select the desired compression rate:
DRC high High compression
DRC low Low compression
DRC off Compression switched off.
10.7 Sorting the stations
> Via MENU > Station order you can sort the order of the stations.
You can choose between: Alphanumeric, Provider and Valid.
10.8 Manual seing
In this menu item you can select the reception channels individually and display their signal intensity. You can
adjust the telescopic antenna optimally for channels suffering from poor reception in the installation location. This
is how stations which have not been found during a scan up until now can be found and played.
To do this, see section 4.3.2.
> Open the channel list via MENU > Manual seing and select the channel to be displayed.
> You can change the channel to be displayed by pressing the r/sPRESET and ENTER buons on the
remote control (7 ,9 ,27) or by rotating and pressing SELECT/VOLUME on the device (5).
11 FM mode
> As described in section 5.2, select the FM Radio source.
When switching on for the first time, the frequency 87.5 MHz is set.
If you have already set or saved a station, the radio plays the station last set.