Operation Manual
47
EN
FR
IT
NL
NW
DK
PL
CZ
SK
When the CD compartment is open, ensure that no foreign objects. The lens of the laser sensor must
not be touched under any circumstances.
Only open the CD compartment when the CD has stopped.
Insert the CD carefully with the printed side facing upwards. Ensure that the CD is not positioned at an
angle.
> Close the CD compartment using the EJECT (13) buon on the device or OPEN/CLOSE (17) on the
remote control. The CD is read and this is shown on the display (4).
After the reading process has finished the first track is played. The track number of the current track, as well as
the playing time, appear on the display (4). With MP3 CDs, the album number also appears.
If the CD is inserted incorrectly or if the CD appears to be faulty, "No CD" appears on the display (4).
Do not perform any operation until the CD content has been completely read, to ensure that all the
required information on the CD has been read. With MP3 CDs in particular, this process can take some
time.
To insert/remove the CD, please hold it by the edge.
> By pressing the Play/Pause buon on the device (3), or buon 4/;on the remote control (31),playback
can be paused (playback flashes on the display (4)), or continued by pressing it again.
> The playback can be stopped by pressing the STOP buon on the device (6) or the < buon on the
remote control (32). The total number of tracks appears on the display (4).
Always stop the playback prior to removing the CD.
If there is no playback, the DIGITRADIO changes to standby after 15 minutes.