Operation Manual
50
> Save the track number you want using the ENTER buon on the remote control (27) or by pressing the
SELECT/VOLUME knob on the device (5). The track is now programmed on memory slot 01.
The display (4) shows the number of the next memory slot. Programme the desired sequence of tracks in the
same way. Use the PRESET button or the <button on the remote control (18, 13) to end the process.
> Press the 4/;(31) button on the remote control or the 4/;(6) button on the device to start playing the
selection. The display shows PRG, the current track number and the playing time.
> If you would like to interrupt the playback of the programmed selection, press button 4/;once.
> To end the programmed playback, press the < button on the remote control (13) or on the device (6).
If you open the CD compartment or activate another source, the programme memory is deleted. The
programming function is also ended by pressing the < button twice.
With MP3 CDs you also indicate the folder/album number.
> Aer starting the programming process using the PRESET buon, first of all an F flashes on the display
followed by the folder/album number. Select the folders/albums using the FOLDER- or FOLDER+ (10, 28)
buons on the remote control.
Track entry then takes place as with audio CDs.
13.10 CD advice
Always keep the CD in its cover and only hold it by the edges. The rainbow-coloured, shimmering surface must
never be touched and must always be kept clean. Do not stick paper or adhesive tape to the label side of the
disc. The CD should be kept away from sunlight and heat sources such as radiators.
Likewise, CDs must not be left in a parked car directly in the sun, since the interior temperature in the car can rise
considerably. Clean off fingerprints and dust on the silver side using a clean, dry cleaning cloth.