Operation Manual

55
EN
FR
IT
NL
NW
DK
PL
CZ
SK
Alternatively:
> Press the EQUALISER buon (EQ) on the remote control (24) to access the equaliser seings directly.
Select the desired equaliser seing.
A * highlights the current selection/setting.
15.2 Internet seings
> You can use MENU > Main menu > System seings > Internet seings to retrieve network seings.
15.2.1 Connection via a network cable
To configure a network connection via a network cable, you can either use the network wizard or do so
manually.
15.2.1.1 Network wizard configuration
> Select the network wizard to start this.
The network wizard searches for all the WLAN networks within the range and displays them, as well as
the [Cable] option.
> In order to use the network connection via a network cable (LAN), select [Cable].
After confirmation, required settings such as IP address, gateway, subnet mask, are automatically
retrieved from your router, provided the DHCP function is activated in the router.