Manual

22
>Rotate Tune / Select ( 4)toruntheresettofactorysetting(Yes)ortocancel(No).
>ConrmbypressingTune/ Select (4).
When running the factory setting, the device restarts and is after that in standby
mode.
>Switch the device on by pressing Volume / standby ( 3 ) and then proceed as de-
scribed under initial installation.
Software version
>OpenthemenubypressingtheMode / Menu (2).
>Turn Tune / Select (4) until you have reached the point SW version.
>Now press Tune/ Select ( 4).
>Leave the display by pressing Mode / Menu (2).
Specifications
FrequencyRange:DAB/DAB+174.928-239.200MHzFM(FM)87.5-108MHz -
Audiooutput:0.8Wrms -
PowerSupplyInput:100-240VAC,50-60Hz -
Output:6VDC/500mA -
Dimensions:175mmx95mmx85mm -