Manual

8
>If you want to listen through the speakers again, unplug the headphones from the
headphone jack of the device.
Switching the device on/off
>Youturnthedeviceturnonorobypressingvolume/standby(3).
Initial use
Whenyouusethedeviceforthersttime,aswellasaftercallingthefactorysetting
andswitchingonagain,thechannelsearchforDABradiostationsstartsautomatically.
During scanning, the display shows the progress of information and the number of
radio stations found.
Aftercompletionofthestationsearch,therststationisdisplayedinalphanumeric
order and played back automatically.
Note :
If no stations are found, no signal could be received. In this case change the location of
the device and / or the position of the wire antenna and run the scan channels again.
Volume adjustment
>Rotatetoadjustvolumeon/standby(3)thedesiredvolume.
- clockwise ->louder
- counterclockwise -> lower
Set display brightness
>Selectbypressingthesnooze/dimmerbutton(7),thedesireddisplaybrightness
(o,dimorbright)from.Duringthestandbyyouadjustthebrightnesswiththeunit
shut and the radio is operating at power on.
Select DAB-/FM-Operation
>Turn on the dial Mode / Menu (2)toswitchbetweenDABmodeandFMmode.Dur-
ing the change from one mode to the newly selected mode will appear below the big
time.