Operation Manual

16
16.1.1 Full scan
Under the advance seings menu, press ‘ < ’ or ‘ > ’ buon to select ‘Full scan’, and then press ‘Select/Menu’
buon to confirm.
Full scan starts automatically. Once a scan is complete, the radio returns to playing the previously selected
station or first station on the list.
Note: If no radio station found, it shows ‘NO DAB STATION’. For a beer reception, adjust the antenna or do the
full scan again in another location.
16.1.2 Manual tune
As well as the normal method of scanning, you can also manually tune to a particular channel/frequency. This
can be useful for adjusting your antenna to achieve the best possible reception and scanning a particular
channel to update the stations list.
Under advance seings menu, press ‘ < ’ or ‘ > ’ buon to select ‘Manual tune’, and then press ‘Select/Menu’
buon to confirm.
Press ‘ < ’ or ‘ > ’ buon to select particular channel/frequency and then press ‘Select/Menu’ buon to confirm.
Note: The display shows a live indication of the received signal strength on the selected frequency.
Adjustments to your antenna will aect the received signal strength displayed. The new stations will be
added to station list automatically.
To play the found station, first press and hold ‘Select/Menu’ buon to exit manual tune
16.1.3 DRC
If you are listening to music with high dynamic range in a noisy environment (for example classical music while
cooking), you may wish to compress the audio dynamic range. This makes quiet sounds louder and loud sounds
quieter.
Under advance seings menu, press ‘ < ’ or ‘ > ’ buon to select ‘DRC’, and then press ‘Select/Menu’ buon to
confirm.
Press ‘ < ’ or ‘ > ’ buon to select ‘DRC o’(default), ‘DRC high‘ or ‚DRC low‘, and then press ‘Select/Menu’
buon to confirm seing.